What you need to know before you flash the BIOS?First you need to download the latest version of it.And the software must be downloaded from the official site of the manufacturer of your device.We strongly recommend not to use the beta version, and use only the latest version of the proven working.With all took seriously to ensure that the laptop was plugged in.The ideal would be if you do it via UPS.Note that the USB flash drive that you will use, and has been proven reliable.If during use you notice any problems (errors, loss of data, etc.), it is necessary to find a worthy replacement.
Never power off the device Asus.Update BIOS not only fail, but also fails motherboard.Also, do not push any buttons during this process.
So, go to how to flash the BIOS.First you need to create a bootable USB flash drive.Next, you need to download the new firmware for the BIOS from the official resource devices.To be sure that it is suitable for your phone model, you can use the search by the serial number.When you are all downloaded, copy the resulting data to a USB flash drive.It is mandatory to mark somewhere on the paper, the name of the file.
Next, you will need to boot from your stick.To do this, check the settings in the ability to boot from a removable drive.When the download is carried out, you will see a command line DOS operating system.Since the flash BIOS?For this you need to register the name of your file that you have written on paper.
Once you do, you can download special utility to update the BIOS ASUS.It will begin independent testing BIOS file for errors, as well as for compliance with the data model of your laptop.Once it is completed, you will be prompted to press any key on your keyboard.Next, you need to confirm the startup process by pressing "Y".
After performing these actions will start the process of updating your BIOS on a laptop, and after him - immediately check the results of the upgrade.All the while you sit and watch patiently until the moment when the whole procedure is completed.Once again I draw your attention to something that does not need to turn off the power and press any key at this time.When everything is completed, the device will restart automatically.At this point, it may happen so that after turning off the laptop for some time will not be included.Do not worry, this is normal.Just wait for it to turn on.
Now you need to enter the BIOS setup and set the new version of the required parameters.That's all.Now you know how to flash the BIOS on your device.The main thing in this case - to do everything slowly, not in a hurry, thinking over every action.Then all you get - and the laptop will work fine.If you are not confident in their abilities, better leave this matter expert who will give you a guarantee of proper operation of your device.
