If you're just starting to learn the art of weaving bracelets, you will learn how to weave Baubles scheme.It is thanks to schemes can create real masterpieces: bracelets with names and many other interesting things.But how to work with them?How to read?And how not to get lost in the notation?
What to consider when teaching?
The main thing you should notice is the selection of the material with which you plan to work later.For example, it may be beads, thread floss, yarn, satin ribbons, colored rezinochki and so on. D. Accordingly, each type of material provides its own quirks and peculiarities of weaving, as well as schemes.So, before you start to study a particular type of weaving select material.
What you need to know when weaving strands of baubles?
Suppose as a starting material you prefer thread floss.What's next?And how to weave Baubles of colored threads?Then you need to learn what components are in weaving, since the creation of the thread bracelets based on them.
main nodes in floss: the node number 1
Node number 1 in the diagram looks like a cross with an arrow and the index down.It is interpreted as follows: You have two working yarn of different colors (eg, yellow and orange);you take a thread, which is located on your left and it is folded towards the other, holding his finger form a triangle;pushes the end of the curved thread under the direct and tie a knot.Then repeat the same procedure for the second time.
If you know the interpretation of symbols and actions associated with them, you can easily get a handle on how to weave Baubles scheme.
Scourge of the main assembly of the thread number 2
node number 2 is a schematic can be represented as a cross, which is located inside a circle with an arrow pointing direction - left down.This designation stands for this: in front of you again two colored thread work;This time you take the one which is on the right side, put it on another;threaded end into a makeshift ring and tie a knot.The second node is performed on a similar system.
understand the circuits: the primary node number 3
Node number 3 in the charts depicted as a cross with a circle inside which is the arrow (which indicates the direction of the right and down).Before how to weave Baubles with the unit, pay attention to the position of the arrow in the center of the circle.Look where it points.
runs a node in the following way: you take the thread that lies to the right and spend it under the other;tie a knot;repeat all the same steps again.
How to weave Baubles of the scheme: the node number 4
fourth node is schematically depicted usually in the form of the cross and a circle with an arrow pointing to the left and down.This figure stands as follows: Working thread to your left is placed on top of the other remains;end of the thread is pulled into the ring, and tied knot.The second time the same work you've put the thread underneath the other and similarly tied in a knot.
What is the cycle of weaving baubles?
Before weave Baubles in stages and according to the scheme, it is necessary to find out one interesting nuance.As it turned out, bracelets can be made both in full and an incomplete cycle.Thus, if an image is assumed in the scheme of a full cycle, then all colors such fenechki arranged in series with the two sides of the article.
If, however, the scheme provides an incomplete cycle of weaving, the picture you see on the complete mismatch of color threads on the left and the right.
Weave with paired and unpaired number of threads
Want to learn how to weave a beautiful bracelet?You do not know how to weave Baubles of the scheme?Read our tips - and you will immediately become clear.So, in the schemes can often be seen that the netting is used paired and unpaired number of strands or ribbons.For example, you can have 5 5 black and gray strands or ribbons, 4 white and 4 red.It would be paired weaving.The unpaired same - the number of worker threads may be different.For example, you can have 5 red and 7 white threads.
How to weave bracelet with the words?
Many masters and masters of one of his first jobs trying to make jewelry with a name or inscription.Is it difficult to do this?In general, no.However, creating such bracelets includes work with a large number of threads in which beginners easy to get confused.
Before weave Baubles with inscriptions, is to find a suitable circuit and to count the exact number of threads needed to create the product.To do this, calculate the number of cells in the first vertical column of the diagram.For example, they turned 8. This means that you will need to weave exactly 8 threads.
In addition, it is worth considering the fact that a drawing or inscription on the bracelet involves the use of two types of threads or ribbons: one of them is used to create the foundations, the background, and the second - for writing or drawing.The length of the secondary thread or tape should not be large (just 50 cm), and the length of the background in the 2-3 times higher than the expected length of the product.Please note that you will need to create a large number of background threads.Therefore it is better to take a skein.The result should be one thread leading 6-8 and background.What else you need to know before you weave Baubles with inscriptions?
What more needs to be done before weaving baubles with an inscription?
Before the work itself, it is necessary to make some simple math.This should be done not only to eventually converged bracelet on your hand, but also to correctly place the label on the product.
To ease the problem, is expected to write a name or an inscription on a piece of paper into the cell.Next, pay attention to how many cells it takes.For example, you get 30 cells, which equates to 30 rows.The approximate density of weaving your product will be 1 cm bracelet - 5 rows.Therefore, 30 rows have a density of 6 cm (30/5).
then measure the volume of the wrist.Assume it corresponds to 15 cm. This means that with a length of 15 cm for fenechki text length 6 cm (15 - 6 = 9) must be made 9cm basic background.If we divide that number by two, we obtain 4.5 cm on each side.Next, multiply this value by 5 and get the number of rows for the background (4.5 x 5 = 22.5 cm).Only under these conditions will be in the middle of the inscription decorations.To learn how to weave Baubles simple, say on.
How do simple baubles?
always best to start with simple products that further enable much faster to master the more advanced technique of weaving.So, if you want to make a simple bracelet, then you best suited oblique weaving.To do this, take an even number of strands or ribbons and divide them in pairs by color.For example, in the middle are two blue thread or ribbon behind them - two orange (one on one, the other - on the other hand), the next - two green, then two purple, two orange and two red.
How to weave Baubles slash next?Next, you need to fix all the strings in a knot and fix them in any convenient way (by means of an adhesive tape, pins, invisible, or holder for the money).Tat is to start with the leftmost tape or thread.
Take the first and second string and using the procedure knots, tie both threads.This same movement, repeat again from the same thread, and then - with the last two (in this case the movement of the nodes will be in mirror image).Thereafter, repeat the same procedure with the other threads or ribbons.When the scheme is working correctly you should get a picture "Tree".
How can I make a round baubles?
If you do not know how to weave Baubles round, we will tell you.The most complex is considered to be a direct and circular weaving, requires some experience.For example, to make a product using braid (round), it is necessary to choose the scheme and prepare yarns (their length should be three times greater than that which is reserved for the most Baubles).
This is the simplest version of this weaving is based on the four-thread;For example, it may be two red and two white or colored.This weaving is done strictly according to the scheme: expand the thread to the side and tie the two ends;then the first place to the second and ties;the second to the third, following the fourth, and then the circle is repeated.
word, understand the scheme is not so difficult.The main thing is to know the general concepts and notation!
