Experts recommend to lay new tile only cleaned and prepared surface.But it so happens that this is not always rational.This is possible in the case if the walls in the house is quite fragile, why it is better not to break their integrity, or are you just trying to save time.Then you can use the instructions that tells how to glue tiles on the tile, and not spend extra time removing the old layer.
first stage
First check whether a well-kept all the pieces of old tiles.If there is at least one thing, that is reeling, safely remove it.Carefully pry chisel and carefully remove the tiles.Try not to touch the adjacent, otherwise you'll have to shoot everything.The pits in this place need to carefully cover up the glue or cement mortar.Trowel for such work should be a smooth edge, this will help create a perfectly smooth surface.
second stage
Once the platform is aligned, you are ready to further work.The surface must be cleaned of dirt and grease.This procedure is considered to be mandatory, otherwise the new tiles peeled off pretty quickly, and you have to start all over again.This is especially true for the kitchen, where the bold raid is always present.Even if you see no visible stains, wash the surface is still needed.For this perfect rigid sponge and means of acid digested fat.Wash any part of the water surface and let dry.
third stage
What you can stick tile?If the old cover - Glazed, it must necessarily be primed.And if the previous coat - dull, you can skip this step - cohesive both sides excellent.
fourth stage
talk about what to glue ceramic tiles, so no problems with the reliability of the new coating.Approximately 12 hours (and better - for days) before the start of the prepared surface is necessary to apply a thin layer of glue.This will help ensure even greater adhesive strength.This stage is considered the most important in the case of how to glue tiles on the tiles.If you miss it, you will soon top layer can fall off and have to start working again.It not only costs extra money, but a waste of time.
fifth and last phase of how to glue tiles on the tile
When the base layer is dry, you can proceed to the application of the tiles.The adhesive should spread over the entire surface of the plate and at its sides.Spread the material needed rows, using equidistant crosses to align joints.Once all the tiles laid out, it is necessary to dry the surface (not less than one day).And only then can apply grout.
Results
We looked at how to glue tiles on the tiles with their hands.Of course, good if the job will execute a wizard that will take into account all the nuances that exist in this kind of case.But maybe you can do it yourself, carefully read the instruction offered here.
