PVC pipes have characteristics not inferior to any plastic or metal pipes, water at the same time are very easy to mount, it is enough once to see how it's done.Next you will learn how the connection is made of reinforced plastic pipes.
First, you find out that you need to work.Naturally, the pipes themselves are needed.They are sold in coils and in appearance they resemble the white hoses used for irrigation.The diameters may be as follows: 16, 20, 26, 32 and 40 millimeters.You must decide what you most suitable size.The compound plastic pipes for the private apartment water pipe is usually done using a pipe with a diameter of 16 or 20 millimeters.The sale of this type of material is carried out by the meter, so it is necessary to determine in advance the length of the pipeline.You rewind a one piece so much meters as required.The next thing you need is fitting, by which is meant the coupling, tees and corners.Fittings are selected depending on the diameter of the pipe.It is worth noting that if you need a compound plastic pipes with metal, you must acquire the clutch and squares.You only need to specify the store pipe diameters of both the seller gave the right size adapter.
If you are interested in a compound plastic pipes, you will need to gauge, designed to slightly increase the pipe diameter, so that the cone of the fitting will be placed freely in the tube, and the pad will not be subject to strong pressure.If not calibrated, then there is a high probability of breaking the gasket.Another important tool that will be required for your work, a hacksaw (no special scissors).It should also pick up the keys of various sizes, suitable for your needs.
To make a connection metal pipes, it is necessary to make a number of simple procedures.To get started is to put a crimp nut washer on the end of the composition pipe.After that, with the help of the caliber needed to do little more than pipe diameter, for which he should be screwed into the lumen of the tube of uniform motion in a circle.In raskalibrovannuyu tube can be inserted into the fitting cone.Next, we need to tighten the screws that allow the puck to slowly squeeze the tube.
fittings and pipes can be mounted via screw connections or press systems.The first case involves the use of a sharp cutter, calibrator, and the wrench.Press the compound plastic pipes involves the use of special equipment.This process is much easier, but the connection is less reliable.To work need to use press jaws.At a press-fitting has a special plastic insert having a spacer ring, designed to control the relative position of the fitting and the pipe, and also provide isolation of the inner layer of the pipe.
One of these principles can join the water, pre-cut into desired sizes of pipes, fittings and picking up.
