Despite the cries of the imminent demise of Windows, the brainchild of Bill Gates has steadfastly refused to give up their positions.Moreover, the number of users is only getting bigger.Unfortunately, to dispel the myth of the "insecurity" and "glyuchnosti» Windows is not so simple.
Sadly, the developers of the OS as best help support this stereotype.In recent years, it is very common among users of the question of how to correct the mistake «0xc0000005».For many, it began to appear immediately after the regular update "Vindovs."
What kind of bug is this?Because of what it appears?All this to tell our article.
When it all started
And all this happened in August, when it updated users' computers at number KB2859537.Immediately after that, Microsoft technical support and thematic forums proved to be overwhelmed with work: people no longer run the program, and in some cases even loading the OS crashes.
What is needed is an update?
Members sorts of "assemblies" immediately began to speculate about the "universal conspiracy", whose goal was to change dishonorable pirates on legitimate programs.Oddly enough, but the pass users of pirated copies of hit accidentally.Especially since they shared the fate of the owners of legitimate copies Wilndows.
And the purpose of this upgrade is extremely important: it covers just four (!) Critical vulnerabilities in the system kernel.If an attacker to comply with certain rules, he could take complete control of those computers where the vulnerability is closed.
However, the technical details are not that interesting.Having said that, only to you, before you correct the error «0xc0000005», did not think about the "dangers" of regular system updates.
What causes this problem?
all happened because of the fact that the "patch» KB2859537 replaces multiple system files.In the case where the original system kernel is modified, this leads to big problems.
And another piece of bad news.The fact is that in September and October went update KB2872339 and KB2882822, which supersede the first patch.Since they have similar purpose, their installation often leads to a very similar effect.
But if your computer bug appeared «0xc0000005» after the update, it should be remembered that the reasons may be covered deeper.Firstly, it follows immediately scan the hard disk for virus and Trojans.
illegally activated copies
If the problem occurs on breaking system, the reason lies in the old version of the file ntoskrnl.exe, which is illegal in the activation of a special utility is renamed xNtKrnl.exe, then it registers in the kernel using the bcdedit.
This is done in order for the system to properly work with the software "glue" that replaces the SLIC-table at boot time.After you upgrade an older version of the kernel becomes incompatible with some file subsystem, why in Windows x64 refuses to start the program previously run in x32 mode.Simply put, when the application starts «0xc0000005», after which it finally takes off.
and blame Microsoft is not worth it: no one guaranteed job of broken systems.By the way, if you activate an updated version of the kernel, the operating system will run stably.This once again confirms that the release of this update, the fight against piracy has not been scheduled.It just happened.
How to fix
Just be warned: if you assume that an error «0xc0000005» after the update may occur on your system, it is logical not to install the updates, which we mentioned above.However, we should not forget also about unpatched vulnerabilities of the system kernel, which can be exploited by a malicious program.
However, even if there is a legal copy of this error, you can correct it, but by rolling back the changes in the system kernel.
first method
First you have to run a command prompt as an administrator.Make it easy.First, be sure to click "Start" in the search bar and type the word «CMD».In the list on the right find similar file, click on it with the right mouse button, a shortcut from the drop menu choose "Run as Administrator".
In the opened command console to print «wusa.exe / uninstall / HF: 2882822".Accordingly, if you apply the update under a different serial number, it is necessary to register it in the last paragraph.
string «wusa.exe» launches a specialized utility, which is just responsible for removal or installation of system patches.
So how to correct the mistake «0xc0000005» in this way is not always possible, you can use the back of the system.
Rollback system
This method is quite reliable, as prior to each installation of critical updates and other important operations, the system automatically creates a restore point.How to run a rollback, not to see the troublesome «access violation 0xc0000005»?
To do this, again, click on the "Start" button, select from the menu "Control Panel", which is necessary to activate the 'Restore'.In the dialog box, click on the "Launch System Restore."After passing through the clues "Wizard", you can easily revert to the Windows operating condition.
Use DISM
If an application error «0xc0000005» Windows 7 comes out, even after all of the above actions, we can only resort to "heavy artillery."
first need to run the recovery environment.To do this, you need the installation CD, from which you performed the installation of the operating system.If you do not have this, then before you correct the error «0xc0000005», it should be set up independently.
To do this, download the official boot disk with Windows 7, and then burn it to a disk or flash drive to the appropriate size.
After recording a disc is inserted into the optical disc and sent to the computer to restart.In the BIOS should be set to boot from CD / DVD-drive.How to do it, you will need to learn from the instruction to the motherboard, as the process from different manufacturers can vary greatly.
booted from the disk, you need to select "Restore."Keep in mind that when you start your computer, you can press the F8 (even without the drive), and then will boot options menu.Select "Repair your computer."But we still recommend that you use optical media, as in this case, you will not depend on the possible failure of the operating system.
In any case, after the choice of restorative options, a dialog box in which you need to select "Command Prompt."
used commands
Keep in mind that since the mistake «0xc0000005» Windows 7, you will eliminate from the BIOS, all of the following commands better copy on a separate sheet or print.If you can set a number of other computer or laptop - very good.
Let's get started.First things first pinpoint the drive letter on which Windows is installed.Of course, in most cases it is "C", but there may be nuances.This is especially true of those users who simultaneously use two or more systems that are located on the same physical disk.
At the command prompt prescribe team «DISM / Image: C: \ / Get-Packages», where "C: \" - this is just the logical drive designation.Accordingly, if necessary, this setting should be changed to suit your requirements.
come out a list in which you need a paragraph that referred to one of the above update (KB2872339, KB2882822, etc.).It will look something like this: «PackageName: Package_for_KV2859537 ~ 31bf3856ad364e35 ~ x86 ~~ 6.1.1.3».
Highlight the desired item with the left mouse button.After that, click on the selected text, right-click on the shortcut menu, select "Copy".After that, the command prompt, type a command of the form: «DISM / Image: C: \ / Remove-Package / PackageName:».
Do everything as carefully as an extra space or accidentally "squeezed" to the Cyrillic letter will drive all your hard work on the "no"!
Immediately after the colon insert the line, which we copied above.It will look something like this: «DISM / Image: C: \ / Remove-Package / PackageName: PackageName: Package_for_KV2859537 ~ 31bf3856ad364e35 ~ x86 ~~ 6.1.1.3».Without the quotes, of course.
After pressing «Enter» will run a special system utility that uninstalls the package you specify.Pay attention!The operation was successful if the selected package does not appear in the list of installed updates.
Check it simple.Open the "Control Panel", find there the item "Update Windows», run it.In the lower left corner of the dialog box there is a link "Installed Updates."If there is no "hero for the day", that pesky message «0xc0000005», appeared after a Windows Update, you no longer bother.
prevention measures
All of the above is completely useless if you do not know about how to prevent similar events in the future.First, be sure to provide your computer protection against viruses.
At the beginning we mentioned that the modification of the kernel malware as time can cause the collapse of the program in case of renovation.In addition, it is strongly advised not to use different patches for installation in third-party themes.
«krasotischa" you (perhaps) hover, but that's just an update error «0xc0000005» surely will bring the joy of the new "svistelok" to zero.
second.Never use the activators.Believe me, once you've set out, and for research (!) Use pirated software, it is best to use OEM keys.Where safety and reliability.But this is only a theory and not a guide to action.Everyone already knows that the reliability and safety of licensed personal and can not be ...
Accordingly, under the same item and get all sorts of "assembly".Who knows what and how to get stuffed "talented" young technology.And "treated" the core is not the worst.As you of Radmin remote administration without a master password?But such assemblies across, not once.Using products from unknown person, you risk not only the stability of the system, but also its own private data and even cash!
Support
Finally, if you follow our good advice, using licensed software, in case of a complete system failure, you can contact the technical support from Microsoft.Phone or other contact information should be on a sticker with a serial number.In addition, learn more about it, you can just go in the "Computer properties", which should be contact details of the computer manufacturer or Microsoft.Of course, if in the "Properties" is something like "Kultshaker007", it will not help you.
And more.Returning again to the subject of assembly and especially "advanced" users, noting the importance of the automatic system recovery.By default, this option is enabled.
But our proud creators, users and assemblies, counting a lot smarter than the creators of Windows, it regularly disconnected.Given how easy life becomes when the recovery, do so simply silly.Save a few gigabytes of free space, you risk losing system because trifling fault.
We hope that you have learned about the reasons because of which there is an application error «0xc0000005».How to fix this unfortunate misunderstanding, we describe in detail in this article.Be of good cheer!Make all of the above is simple enough.
