to bike faithfully served his master for many decades, the owner of the bike is necessary to periodically lubricate all mechanisms.Priority attention should be paid to the undercarriage - parts that are directly responsible for the movement of two-wheeled steed.
types of lubricants
What grease to lubricate the wheel?Currently, there are a wide variety of tools that can be used for lubrication of various bogies bicycle.
- liquid oils - Grease a bicycle, which is suitable for all categories of care chains, brake systems and amortization.Due to the structure of the liquid effectively envelop the areas to be treated, ensuring the smooth functioning of the bicycle parts for a long time.
- Aerosols - ideal for the lubrication of thread switches ropes.
- Plastic Type lubricants - used when necessary seals of various compounds.
- lubricants containing lithium - a special kind of greases with a whole array of additional components.
- lubricants calcium - belong to the category of plastic materials.They are intended for the care of all kinds of nodes and connections.
training bike
Many experienced cyclists believe that after each major trip, and especially before elective grease basic mechanisms necessary to carry out a comprehensive clean up the bike from contamination.This can significantly extend the life of the defining nodes of two-wheeled friend and keep him attractive.
Currently, the market is packed with special facilities in the form of liquids for cleaning bicycles.Most of them eat off the dirt and cleans parts bike for a few minutes and then easily washed away from the surface.
However, it is not necessary to resort to additional costs for the purchase of cleaning fluids.The expected effect can be easily obtained using the normal hot water and shampoo.Alternatively, you can use the most gentle means to wash dishes with a low salt content.
bicycle fork Lubrication Grease
located in the front fork bearings must be done with the use of oil is relatively thick consistency.Due to the high probability of contamination of the lower bearing fork sports or mountain bike the dust because of the impressive gap it is recommended to perform the procedure frequently (several times a month).However, urban bicycle fork grease, which is used in the power saving mode is not a mandatory procedure.
carriage
As in the previous case, the hub gear bike carriage smeared with thick materials.Initially grease generously laid in the carriage even when the assembly of the bike.Regarding the care of bike racing models, the carriage is processed very liquid lubricant.
Grease rear bicycle hub bearing grease
rear bushings made not more frequently than once a month.For this purpose it is expedient to use a liquid oil, which is poured into the mechanism bush only a few drops.
Speaking about the lubrication of brake systems in the bushes, then to carry out such actions should be very careful to not damage anything.These elements are lubricated with engine oil or bone, common in the care of the sewing machine.This will be enough to grease the wheels of the bike is completed.
It should be noted that the treatment sleeves excessive amount of oil is fraught with the emergence of the effect of slipping during movement.Also flowing from the hub grease will collect on the surface of the mechanism of pollution in the form of debris and dust of the road.This in turn can cause premature wear of parts.Therefore bicycle bearing grease should be applied wisely.
Switches
Lubricate switches types of liquid oils with the active operation of a bicycle with a frequency of several times during the week.Switches sport bike models, which are used to driving long distances, it is recommended to grease before each next exit.
Ropes gear and braking
Perform care using cables and brake switch is possible as with conventional liquid oils, and all kinds of aerosols.For effective lubrication of the member sufficiently small amount of oil, just drops.And lubricated only input and output elements of the hole through which the cables.
chain
most effective means for the chain lubrication is a liquid synthetic oil.It is not necessary to lubricate the inner surface of the roller chain, because such action does not actually entail any practical sense.Instead, you should handle the oil side of the outer links on both sides.Coping with the problem of convenient, being available lubricator with a thin end.
Once lubricant bike here is complete, you must scroll through the transmission and gently wipe the outer surface of the chain dry piece of cotton material.
depreciation
system to lubricate the front fork, enough to fill a liquid oil is usually a medical syringe.Follow the procedure allows you to fill lubrication protective plastic caps, which are located in the upper part of the leg suspension fork.
rear shock is also processed oil liquid consistency.When choosing lubricants correct consistency for the care of the front and rear suspension system there should be absolutely no problem.
Pedals
To grease the bicycle was considered complete, the processing is necessary to make the pedals.To this end, the constituent elements of the pedals must be disassembled first:
- removed plug which protects nut pedals;
- nut be turned out, and then shot the lock washers and extracted cone;
- dismantled bearings and pedals removed from the axles.
Further details pedals thoroughly washed in kerosene and then wiped off with a cloth.Once all the constituent elements of the pedal mechanism to dry runs of their lubrication oil.At the end of the pedal is assembled in reverse order of their installation.
Finally
Once executed bicycle lubricant is recommended to sit on the bike, step through all the programs, evaluate the performance of switches Check the brake system.It is necessary to remove excess oil from the treated mechanisms bicycle.Outside the oil is nowhere to be much, much less lubricant should not be based on a dense layer or drip from the parts of the bike.
Ultimately, you can polish the bike with special polishes for paints and varnishes.This will not only give the bike a spectacular shine but also provide protection against dirt and dust settling on the mechanisms.
perform the full range of the above procedures can be regarded as a planned care systems complete bicycle.Clean, silently rolling, and most importantly - safe bike always brings only positive emotions to the owner.
