In this article you will find out how to cover the roof Decking correctly and quickly.First of all, you should understand the advantages and disadvantages of such a roof.The profile has good strength, light weight, low cost.In addition, it is simple enough to install, and this does not need to build a reinforced truss system.It should be noted that the decking can be galvanized, and a variety of shades will provide your home originality and style.However, it should be installed in view of features of weather in the region.
Before Bent cover the roof, be sure to find out all the nuances of the procedure.During the work should follow a strict sequence.The smallest angle of the roof to allow use of this material is 14⁰.The overlap in this case should not be less than 20 cm (15-20 cm at 15⁰ and more).If the inclination angle is not significant, then, for good sheets should be used to strengthen a strong sealant, which are processed by the horizontal and vertical joints.
How to cover the roof Decking?So, first select the material, tools and other necessary details.For fixing elements must use special screws with a gasket.It protects the hole from moisture during rain.Spun they must be in the lower part of the wave.The length of the screws usually does not exceed 5 cm for fixing plates and 8 cm for screwing the ridge.
Before Bent cover the roof, be sure to build a crate.Its size depends largely on what kind of material is the height of the corrugations.Be sure to calculate the amount of corrugated board, it was not necessary to buy an additional 1-2 slate.Crate should consider the type of material.For example, the solid layer has a structure in that case, if the sheets of brand C-8, C-10, C-20.
After everything crates need to organize steam and waterproofing.Now in stores selling building materials different films that are used for this purpose.If you buy such material is not possible, you can use the usual roofing material.
One of the rules of how to cover the roof Decking - mandatory pre-inspection preparation of the roof, fix the identified deficiencies.Mount sheets should begin with a lower angle of slope.And the roof overhang is done immediately.During operation, be very careful to walk on the roof, so as not to break it.For screwing 1 sq.m.the roof should be used about 7 screws.In those places where the material will abut on the wall to be additionally used and the angular sealing strip.At least on the roof mounted horse.
during operation and during transport of the material is necessary to be extremely cautious.The fact that with careless handling can damage the protective polymer layer on the sheet, resulting in rapid wear and rust roof.
If you are in doubt about whether you can perform this procedure yourself, hire professionals who can, observing technology, to cover the roof Decking.The price of services will depend on the complexity of the work and material cost.
