If you love to do needlework, then you just need to build a machine for embroidery by hand.Make it easy.With regard to the material here it is all depends on your ability.You can purchase for plastic pipe or wooden slats.
advantages provided design
It should be noted that the machine embroidery, his hands made for this manual has many positive qualities.This, for example, such as:
- simple design;
- small cost of the device;
- choice of machine sizes (height and width);
- account all the needs of the needlewoman;
- low weight;
- strength.
during construction provided the designs you yourself can determine to what size the fabric must be designed frame, whereby it must be fixed.If necessary, you can equip your machine with additional lighting.In addition, you can easily make the device a sofa or manual type.
What materials are needed for the job?
In order to produce a machine for sewing your own hands, you need to first pick up all the necessary tools and materials.You will need:
- drill;
- Bulgarian or jigsaw (to cut rods or tubes);
- fasteners (bolts or screws);
- wooden slats or tubes (in this case also need to purchase fittings and clamps);
- rubber pads on the legs (if the design will be installed on the floor).
In principle, these materials would be enough to make the machine for embroidery cross.
Instructions Manufacturing designs
consider the main stages of the manufacture of the product represented, regardless of the material.After that you need to start doing machine embroidery by hand.
- first started manufacturing the rack, which will be located frame.It requires 6 wooden slats, 2 of which must be short, and the rest - a little longer.They must be collected into a single structure.Should be affixed with bolts or screws, but this should be done so that the supports were persistent and strong.If you are going to collect the machine for embroidery with their hands from the pipes, the operating principle is the same.Just for combining the elements needed fittings and locks.
- Now we need to make a frame, which will be fixed tissue.To do this, connect the 4 slats.Their length depends on the dimensions of the frame.Installing it is necessary for special rocker mounted on legs.Note that the frame should be extensible, so you can easily change its size, based on the size of embroidery.
- For the construction of the sliding strips need to take rail with through slots.This must be present on the edges of the indentation of about 2 cm. The slits are inserted into a small wooden items, and nailed them one more bracket.This way you can increase or decrease the frame.
- Now attach the prepared piece to the legs.To do this, screw the bolts in the central part of the side rails - so you can rotate the frame up or down.At the edges of this element should be attached clamps to keep him in position.
Basically, now you know how to make a machine for embroidery.This manual shows the basic course of works.The construction of additional facilities, as well as the design of the product you choose for yourself.Of course, before any action is necessary to draw on the paper machine and make all the necessary calculations.
