bars on the windows now an integral part of the home.On the ground floor is the addition serves not only as a guarantee of security, but also the integrity of the apartment or house.Grille on the window with his hands can be made so as to decorate the opening and give it charm and individuality.You can order these designs, but carrying out the work will cost very expensive.If you have some skills to work with metal and welding can be performed independently carry out these manipulations.
preparatory work in advance of the work necessary to remove measurements from the openings.Grating to be produced so as to be equivalent to the width of the indicator, peculiar to the window opening.Only the size of the data will need to take about 6 cm. The lattice height may be somewhat below the window, the groove between it and the opening must be such as to squeeze through it was impossible.Once you manage to perform measurements, you need to make a sketch, which should be reflected principal and decorative elements.If the design has a complex pattern, it can be observed in the drawing the most significant in size hole, to determine whether the ability to eliminate the penetration of intruders in the house.
Grille on the window with his hands can be made on the technology, which involves the creation of swing-type structure, that is, the system will have two wings, with the need to provide a place for fixing the lock.One of the valves may be rigid, that is firmly attached, while the second flap swing can do, it will provide the design, which will be available in the event of a fire hazard.Hinged flap at the same time must be placed at the opening of the window sash.
Drawing sketch
When the bars on the windows made with their own hands, must be prepared by a sketch, it must be remembered that, in order to grill has not changed its linear dimensions, it must have a sufficient number of ribs.It is preferable to use this frame made of corners, coupling brackets can be made with the help of rods.
If the lattice is more complex, possessing unique forms, the design should be not only horizontal but also vertical elements, which the pair should be made in the greatest number of points.
choice of material
Grille on the window with his hands can be performed only after you will be able to choose the material and calculate the right amount of it.To carry out the work will need rods, angles, locking elements, hanging loop.
Preparation tools and materials for work
need to prepare welding machine, grinders, which should have a community designed to work with steel.It will need a hammer and punch, whose diameter must be 2 millimeters less than the diameter of the corrugated bar, designed for pins.You will need to conduct works scrap corner, which can be replaced with steel strips for fixing the hinge pins.Once you manage to complete the installation of the lattice, its elements can be primed, and then paint designed for use on metal.
Technology of lattice
before a grille on the window with his hands, will have to prepare the material and cut it following the sketch.If there is a need to create a fairly complex pattern, it will be necessary to bend the elements.The most convenient way to produce such works in advance prepared templates.In order to perform a rounded elements to apply a steel pipe which has a suitable diameter.If the lattice pattern is presented in mirror image, it should not be forgotten in the preparation of the structure.In the next stage, when the bars on the windows made with his own hands, a photo which you can see in the article, it is permissible to move the welding, using a sketch.
Features of the assembly structure
carry out welding work on a flat surface is preferable, for this excellent steel workbench or playground made of concrete.Welding operations necessary to start from the ends of the frame elements or, in this case the elements should be on prihvachen spot welding.Then you can move on to the measurement of the lattice, in the process, you need to compare the diagonal if the result corresponds to the drawing, it is possible to continue the process of assembling the grating.
If the design has no basis in the frame, the loops in the installation and construction of the lock rods need to be welded pieces of steel strip, which often replaced area.Among other things, it must be strengthened by one of the gratings metal strip.The slopes of the window to fix the pins.To do this, you need to make the assembled grid to the opening and align, and then mark the area of mounting pins, given the place the hinge pins.To fix Bivalve grids will need to use pins of 8 pieces.Two will need to be positioned on each side of the window, the other must be installed above and below.When the hammer when the grill is made at the windows with their hands in a wooden house, you need to drill holes in slopes, the depth of which is 15 cm. They should set the pins, which are made of corrugated bar.To make the work needed so that on the surface of the rod was visible on 3 centimeters.
If there is a need, the rod can be cut using a grinder.It must be strengthened by welding area, which can be replaced with a steel strip, configured as a frame.Welding hinges must be done in such a way that they are directed towards each other, this will provide a lattice structure that has a non-removable.Then construction can be applied in place and welded to the loop.
processing of array elements
before a grille on the window itself, you need to think about what materials will be used for the protection of elements of scale.To do this, you need to cover them with a primer, and the last stage of the surface of the parts can be treated with a paint designed for use on metal.If you are thinking about how to make and install bars on the window itself, then you need to use vyshepredstavlennymi recommendations.
