due to neglect temperature control is often on the surface of the soleplate coating is formed, thereby preventing stroke and leaving dirty marks on clothes.Before operating the appliance should always read the instructions.Keep in mind that wool is best to iron through a damp cheesecloth and for synthetics or silk is not necessary to put the heat.If the plaque has already appeared, then the question arises of how to clean the iron at home from the burn-that he was as good as new.
Basic cleaning methods relevant for all irons
the easiest and fastest method of cleaning the surfaces of the plaque is a special pencil.It is only necessary to heat the iron and smear his sole means that, after a while begins to melt contamination.The surface should be wiped with a dry cloth, and when the iron has cooled, rinse with clear water to get rid of the remains of a chemical reaction.Pencil has a pungent smell, so you should be engaged in cleaning in a well-ventilated room, and then wash your hands.
very effective way how to clean iron at home is the use of a conventional hydrogen peroxide.The procedure is done with gloves on, you need to moisten the cotton swab in the solution and wipe them sole.From varnish helps gidroperita tablet.It produces a strong unpleasant smell, so this method of learning how to clean iron at home, and decided to use it, you should get out before the appliance outside.Tablets should be spend on the dirt at the base of a preheated, let it cool down and wipe with a damp cloth.
How to clean Teflon soleplate?
fresh coating can be removed using ordinary soap.To do this, heat the device to rub his vehicle and leave to cool.Then a damp, soft cloth to wipe the soles of soap.Removes dirt and vinegar.It is necessary to heat up the iron to maximum temperature and coat the surface with a cotton swab dipped in vinegar.Holes cleaned with cotton buds.To instrument shone purity should be ironed unnecessary cotton cloth, on it all the dirt will remain.How to clean iron at home from the molten polyethylene?It should be dipped in nail polish remover with a cotton swab to wipe the dirty soles.
How to get rid of the rust on the soleplate?
Many housewives are interested in the question of how to clean the ceramic soleplate rust.In some cases, use cleaner "Silit".For this appliance heats up, flipped up the sole, and the means is applied directly to the hole.Within 10 minutes of the holes will be released dirt, which you need to collect a clean sponge, wash and wipe the surface with a dry cloth.For this purpose, with a suitable water descaler and based 0.5 tsp. 250 mg of water.The solution is poured into the iron, which is then heated.Scale fall behind after half an hour.To rust did not appear to be when ironing, use distilled water instead of the one that flows from the tap.It does not form inside the unit of scale because of its chemical properties.
