The hottest time of the cap is a necessary accessory.But it is not always at hand.Creating origami paper can give a second life, and receive the necessary thing.This article will be described step by step how to make a hat out of newspaper.
There are several options for the manufacture of headgear of newsprint.So, let us consider some examples.For the production of a standard sheet of paper need any other paper, the size of which - no less than 53 X 53 cm. Cap the newspaper does not protect from the rain, but it will be a great helper when picked up under the scorching sun.Its use is particularly true in the garden area or during outdoor recreation.
Classic cap with a visor from the newspaper
1. From the sheet paper is square.For this purpose one of the angles is laid diagonally.The lower part of the newspaper is superimposed on a triangle and cut.
2. The sheet is left folded at an angle of 45 degrees or folded.If done right, it turns out a triangle.
3. Paper broad side of the triangle is turned down.
4. The upper corner is bent toward the center of the bottom of the preformed shape.
5. The folded corner is raised, and the lower side portion of the blank laid on each other to the top.By type resulting figure resembles a trapezoid.
6. One of the parts (located above) raised angle is lowered and folded layers are folded under.It should be harder to press for a more reliable fastening.
7. The preform need to flip the other side to him.
8. Then, the remainder of the triangle is laid down.
9. Model turned around 180 degrees.After that, the lower part is disclosed, so you can see the inside of the cap of the future.
10. Next, you need to press the sides to shape.
11. The upper parts are laid so that the inside view of exactly match the pattern.The corners are bent to the center and look at each other.
12. The final step is formed visor.First, you need to lay it up, then bend back, leaving a 1-2 cm from the fold line.
Done!That's all the instructions on how to make a hat out of newspaper.
simple variant without a visor
This lightweight version of the cap manufacture with their own hands.
1. Take a sheet of paper.
2. Fold in half to form a rectangle.
3. The upper corners are bent to the middle of the sheet.
4. They are well pressed.
5. One of the lower portions is bent upward.
6. The workpiece is inverted, with the second part does a similar action.
7. The lower part is disclosed, headgear is attached to the form.
Here is a simple guide that answers the question of how to make a hat out of newspaper with their own hands.The task is simple, it can handle even a child.
square cap
- necessary to take a sheet of paper.
- One corner bent to the opposite side, forming a square.
- Repeat this procedure with the other hand, when it is a second diagonal.
- The blank is folded along the diagonal corner and flipped up part.
- angles are laid to the underside of the widest part of the large triangle.
- model is inverted repeats produced earlier action.
- If done correctly, then a visor to be turned up.
- to secure the form remains just curl.
Conclusion
way to create origami caps set, similar products obtained by original, not similar to each other.They can be either with a visor, and without it, square and round.
The article described only a few options for how to make a hat out of paper without using scissors and glue.These methods are available for both adults and children.For kids creating hats out of paper - an exciting and enriching lessons, while still getting the right thing.
