Almost every boy in his childhood dream of becoming an astronaut to be able to conquer stellar distances.To carry out these fantasies units, while others can do spaceships with their hands together with your child.There are many different versions of the original craft, which can handle even a child.
How to make a model of the spaceship?
To make bright and beautiful crafts, you will not need special talents, the main thing - to follow the instruction.To work, you need to take:
- PVA glue;
- strips of corrugated cardboard width of 1 cm;
- with hot glue gun.
finished corrugated strip can be purchased in stores for needlework or cut them out of the cardboard sheets.Depending on this, their length will vary from 29 to 50 cm (in this description uses strips 50 cm).
The manufacturing process begins to make a spaceship model with his hands:
- necessary to take 2 strips and glued together using PVA glue.As a result, you need to make 10 pieces.
- Each of the resulting strips must be wrapped in a tight spiral, the end of which you want to paste.As a result, you should have 10 "goals."They need to stick together in a single cylinder.By the way, if you do not have stripes, the cylinder can be made from a sheet of corrugated cardboard.
- Getting bow.That it turned out beautiful, it is recommended to take strips of different colors, they need 3 pieces.Glue them together and twist into a spiral, like the previous ones.The same "puck" to do for the engine.
- Now you need to take spiral make finger inside and squeeze "puck", so that it took the form of a cone, and you can take to squeeze a pen or needle.Just do not make any sudden movements, so that the paper unwind, and will need to do everything from the beginning.As a result, the nose of you should get to the sharp end and the motor with a blunt, he was able to keep the spacecraft in an upright position.To received the cones do not dissolve in promazhte them with a thick layer of glue.
- Now we need to make additional nozzle.To do this, take 2 strips, for example, red and green 4.They must be cut in half in length and width.Next is the glue of 3 pieces of 4 strips.They need to tighten again in tight spiral and also put forward, as well as the ship's bow.
- To attach cylinder engine the sharp end, and glue around the small nozzles.Top fasten the nose future spacecraft.
- Now we need to make our wings of the craft.To do this, take 2 strips of different colors, glue them together and roll into a tight spiral.Then you should give to the future shape of the wings.To do this, you need to squeeze resulting "puck" in the triangle.Ready wings fastened to the center of the cylinder on both sides at the same distance.
- Now the same principle do 2 round portholes, but they have to be small.
make such spaceships with your hands can be with their children.Such a product will look better than expensive toys from the store.
crafts: a spaceship with his hands
This option will overcome any child exactly as it is very easy to do.For this you need to take crafts:
- different cylinders are made of cardboard, for example, the basis for the foil or plastic wrap a roll of toilet paper or paper towels and others.
- ordinary cardboard;
- double-sided tape and glue;
- cup of yogurt cups and cardboard;
- colored paper or foil.
manufacturing process
crafts - spaceship made with their own hands, like any boy.It is also a great option for exhibitions in kindergarten and school.Proceed directly to the manufacture of:
- to base missiles need to take 2 rolls of thick, large and small.To make the cone, simply fold the cardboard, just make sure that the radius of the base was like a cylinder.Connecting parts with glue or tape.To spacecraft has the ability to stand upright, to the need to glue the base of the cup to the cylinder bottom yogurt.
- Now we need to make two fuel tanks.To do this, take 2 small cylinder of the same diameter as the base of the rocket.Top glue cups.
- To make a rocket launcher, you need to take small cylinders and cones are made of cardboard, to be glued on.Ready missiles glue to the center between the rocket fuel tanks.
- To decorate, use the foil and colored paper.
make such spaceships with their hands even more original you can using a variety of ornaments, for example, stars, confetti, and others. Additionally, you can give your child paint and asked to decorate crafts in its sole discretion, in which case you'll have a realFamily masterpiece.
Other options
To make spaceships with your hands, you can also use plastic bottles.To do this is to cut off the base, made of cardboard wings and decorate with colored paper.In general, show creativity as your child will be very pleased to receive the crafts made by the parents, not store-bought.
