To give the interior a novelty and a shade of chic, it is not necessary to buy too expensive fabric for example, new curtains or furniture to replace the cover.You can use the technique to create an unusual volume of products - puffs.Consider how you can use this element of the decor.
This article describes how to obtain unique and elegant curtains and bedspreads.Puffs in each example are different appearance and, accordingly, manufacturing technology.
materials used to puff
main distinguishing feature in the performance of almost all kinds of decorative elements - an increase by 2-2.5 times of fabric.This is due to the lush assemblies and fluting.The same principle is carried out, for example, shown below the master class is "covered."Puffs of not collected product off the shelf turned twice smaller in width than the original tissue.And in the case of a dense weave need to have triple the stock material.Marking is done from the inside.If a pattern is going to face, it is usually the place is decorated with beads or contraction clusters of beads.
use schemes
To work must be strictly for the intended drawings ornament.Most of the patterns provide the wrong tie fabric.In this case, to obtain the most accurate puffs.Master class, as a rule, always accompanied by a corresponding scheme.It was transferred to the cloth, which was pre-square off.Experienced handy skip this point and are content only points carried over from drawings by puncture marks and the direction of motion.The secret lies in the skillful work alternately pulling threads and beautiful upholstery fabric.
How are big puffs?Master-class pattern "braids" for blankets
look at how this is done most often used ornament:
1. Mark the fabric with the wrong side on the squares of side 3 cm.
2. Apply a slanting line, missing cells in strict alternation(see. diagram).
3. Start with the leftmost vertical row, moving in a zigzag manner.
4. Pierce the fabric in place the first fold and secure the stitches.
5. The second puncture do at the end of the line, pull the thread and fasten repeated puncture.
6. Pass the free cells and place them on the thread without pulling up the next strip labeled.Repeat step retraction for FCB.
7. In the same way all the series pass, connecting the fabric only in those areas where it is noted on the diagram.
How to removable puffs?Master-class decoration of simple curtains
you do not plan to completely replace all of the elements of the interior.Or, for example, the curtains are pretty decent, but boring.What to do in this case?Decorate fabric with removable parts.To do this, take a strip corresponding to the color of fabric having a length equal to the width of the curtains.When cutting is necessary to consider tailoring technology.This magnificent finish would be best to do a double to internal seams do not have to handle.As a rule, inlay in the transverse direction in the finished product is usually not less than 15-20 cm. So, it is necessary to cut a width of about 30-45 cm. Sewn trim on the lower edge of the curtains.Puffs obtained by the assembly 12-15 cm. Very original looks like a combination of features with other - contrasting fabric, lace, etc.
Production volume
curtains for window decorations unusual bushy short curtains are very simple to make them beautiful puffs.Master Class, as described below, is presented in the form of an instruction:
1. Measure the window to define the width and the desired length curtains.
2. Make the necessary calculations.For pomp need to take a triple width and height of the original triple.
3. If necessary links make cuts tissue along vertical lines.
4. Obstrochite curtains on all sides by filling the upper part for fastening on the ledge.
5. Mark out from the inside vertical lines, which will be collected puffs.At these locations at regular intervals (see primerno20-25) stitched fabric narrow inlay.
6. Insert them through from the top to the bottom of the thin ribbons while collecting tissue and forming beautiful folds.
7. After receiving the necessary forms secure inlay on the inside, cut off the excess length.
Application ideas for furniture
in this case is not entirely appropriate to the use of certain technologies.After all, you see, to decorate furniture elements with very lush assembly is not very practical.More successful is the creation of an almost smooth surface, but has a significant bulge.To do this, prepare the material for the top for a magnificent sandwiching and foundations.
work can be done in two ways: direct processing by a finish coating of furniture or a separate manufacturing fabric and its further consolidation.And how are obtained puffs?His hands they have to perform individually by squeezing lush layers.This typically uses large decorative buttons or folded in several layers of tissue segments.Therefore, it is better to choose the first option - fastening fabric on the furniture surface creating lush puff to the desired location.
use some decorative items allows you to create a unique interior design.But always remember that the sense of taste and measure never hurts.Have fun and creative ideas!
