carrying out repair work, often have to deal with an issue like the uneven slopes and angles.For plastering of surfaces and give them the necessary geometry of the device is very popular paint area.
Advantages paint corner
Make the subject of materials, corrosion-resistant, so you can use it at work and indoors and outdoors.Thanks
available for the entire length of the corner holes for fixing its quality in the performance of finishing work, which prevents slipping and reduces the weight on the ground.Moreover, perforation allows the use of a paint area as a subsidiary level.
Ease of use is achieved due to the fact that this device is installed simply enough.You only need to push the profile applied to the outer corner of plaster and cover the second layer of solution.The light weight, durability and safety of the health supplement the list of its advantages.
Types painting over
Corner perforated paint a lengthy profile.There are several types of parts, depending on the material used in their manufacture and use.
for cladding, reinforcement of various designs and the room is most suitable made of aluminum.It has standard dimensions (30x30 and 50x50 centimeters) and can be of different lengths.
Paint galvanized Area is mainly intended to strengthen the walls of plasterboard.By the corner shelves attached special fiberglass mesh, which provides a secure grip and additional hardware for installation.It ensures durability and the particular strength of the external angle.
plastic corner is used to decorate the outer corners of the room and protect them from wear.It has a wide variety of colors, allowing you to choose the most suitable color of the wallpaper.
Where quality is especially needed reinforcement, used area with a paint or metal mesh.
Arched paint area makes it easy to give the design the desired curved shape if you need to install the arch.It manufactured as aluminum and plastic.
Application paint corner
Installation begins with measurement.First you need to measure out the required size and cut.For example, to trim window opening require 3 brackets.Then, a solution of putty, specially designed for this purpose.You can apply a mixture of plaster and putty in the ratio 1: 1.At an angle which is necessary to equalize, the prepared solution is applied over the entire length.After that set Painter Area, while the alignment is done by rules or building level.
At furnish virtually any internal structures, you can use this device: window and door slopes, niches, walls and other various external angles.Area is the effective protection of the corner elements that are inside or outside the room.
