Sometimes, in order to find the answer to a seemingly simple question, one has to resort to the help of the Internet.This is not surprising, especially considering the amount of useless information, which heads in pupils and students.A person can remember how to calculate the integral, but forget how to calculate the area of a room.This question is the topic of today's article.
only way
In fact, how to calculate the area of a room, no big deal.There is only one method for calculation.It lies in the fact that it is necessary to multiply two quantities - the length and width.Or against walls, - the height to the width.In general, without determining the area impossible to accurately calculate how much it cost to repair the room, as the number of materials for finishing selected it based on the obtained value.
tools and solutions
The articles on the topic: "How to calculate the area of a room?" Is usually indicated two tools you can use to perform measurements - is familiar roulette, or if there is a laser rangefinder.Although a majority in the presence of only the first obtained precision is sufficient for measurements.
So, imagine that you need to understand how to calculate the area of a room in which there is one door and one window.First, we measure off the height of the solid wall from floor to ceiling.Then, on the opposite wall, stretching the tape roulette on the plinth.These values are multiplied in meters, and it turns out the area of the site premises.The same is done in relation to all the other three sides (if the room is rectangular).The next step you need to take into account the door and window.Similarly, with a tape, removable measurements of length and width of openings and their area calculated.Since these elements do not require finishing, then the total sum of the areas of openings values subtracted.
often than walls and ceiling must be measured.Since the walls can be positioned at a slight angle, invisible eye, if you try to calculate the ceiling area, based on the size of the floor, you can get the wrong data.Therefore, it is necessary to properly identify measure each element separately.This is especially important when the planned renovation bedroom, where the ceiling - one of the most examined surfaces.
be taken into account when calculating the opportunity to make the walls and niches.All these elements are calculated separately, and their surface area is added to the principal.
Remembering geometry
While most buildings is a rectangular shape, sometimes there are triangular, and even semi-circular room.In the first case it is necessary to measure the length of the two sides forming a right angle, multiply the two numbers and divide them into Round 2. For other premises used formula should measure the diameter (distance between two opposite points of the circle passing through the center), and then multiply the resulting numberthe same (square) and multiply by the famous pi equal to 3.14.The result will only be divided into four - this will be the area.
As you can see, nothing complicated in the definition of the area do not.It will take just a little time, roulette, as well as a pen and a blank sheet of paper to record results.
