Vintage spit is not as common as it once was, but today often there are situations when there is a reliable tool.Here are just a few people know how to bring the old tool in a working condition.
For example, as discourage plait?We are sure that you are not even close to imagine this process, and in fact unprepared cloth (or wrong repulsed) not only bad doing its job, but it can be dangerous to the mower!
Some information
Prepare tools necessary not only after the purchase, but also throughout its operation.At first glance, there is nothing complicated in this work there.Seasoned mowers are well aware that the matter is complex, requiring considerable knowledge and experience.No wonder once the master of weaning respected by all villagers.Not to mention that to the "right" people went to the master distance.
What is it?
Beginners question is not even how to beat off a scythe, but rather for what it is at all necessary?After all, it can be easy to grind!Alas, it is not so simple.
As a result, the blade spacing becomes perfectly thin along its entire length.Furthermore, it is formed peening (influx) of metal, which not only increases its strength and stiffness, but also greatly increases the service life.
How and what do
process is performed on a special small anvil, which is called the grandmother.There are wide and narrow versions.Since discourage scythe often in the field, to use this special small hammer, which is easy to carry.Important!The working surfaces of the anvil and the hammer must be different even metallic luster.
Occasionally masters perform the skip wide hammer, but it requires special skills.In any case, the metal anvil to be softer material of the braid.
Working
should strike, going from the heel of the knife.The hammer is raised five centimeters high, rattling them literally every millimeter of instrument.In no case can not be beat at an angle, casual, and more than once hit the same place.It is recommended to perform several passes until it reaches the best state of the blade.
How discourage scythe in field conditions?To do this, you have to buy in a specialty store special holder.His driven into a stump or a specially for this purpose we carry deck, then clamped tail braids.Con anvil and begin to work.
Features
process is very important to pick up a hammer to his weight in any case not much supercharged hand.Operating heavy tools, you'll quickly get tired, but because the quality is not spacing out.
In any case, heavy and bumps blade will become "chipped", why have to redo all the work again.In general, spit - very delicate instrument, so the masters in this case are only a few years.After weaning need to sharpen the blade.To do this, use the special bar.
Now that you've learned how to fight off and sharpen a scythe, you can safely go into the field.
