Poor water goes in the sink?Drain the water in the toilet is not possible at all?So you met a problem called "obstruction".How to eliminate the blockage in the sewer pipes, check out this article.
tubal patency often disturbed by ingestion of foreign objects into the sewer.Therefore, the main preventive measure to be vigilant tracking so that the drain in the sink and tub did not penetrate, but water.
If the water became too long to linger, before going down the drain, or even refuses to leave the sink or toilet, the urgent need to address the problem.How to fix clogged sewer?Read about it on.
How to eliminate the blockage in the sink
first option - mechanical.You will need a cable, or a plunger pump. first consider the most simple and accessible method for cleaning sewer pipes using the plunger.This simple device is in the house everyone, and it is very easy to use.
- with a cloth or tape is necessary to close an additional drain hole in the sink.
- now should be possible to press the plunger to close the drain.
- by moving plunger handle up and down properly bleed the air filling tube.The problem can be considered completed when the water starts to leave quickly.
Some craftsmen to the question of how to eliminate the blockage, it is advised to use a vacuum cleaner.This is a very questionable method, especially in hardware stores has a lot of tools.For example, you can use a special pump.In fact, this is the same plunger, but it is even easier to use.If you've ever used a hand pump, the handling of this device will not cause you problems.Algorithm of actions is the same as using a plunger.
more sophisticated version - purging pipes using a cable.It is a long spring, which is often used plumbing.It should be used only when other methods are powerless, because it means that the blockage is located directly in the pipe.
- Remove the siphon from the pipes and the shell.
- Gently insert the cable into the lumen of the tube.
- At that moment, when the end of the rope hits a barrier, rotational movements move it back and forth.
How to fix clogged by chemical means
Today in hardware stores can find enough money to clean the pipes.These chemicals are produced or in the powder form, or as a gel.Using them is very simple.
If you purchased a vehicle in the powder, then pour the entire contents of the bag into the sink.Pour in a glass of warm water pipe.Now we need to wait for about half an hour.It remains only to wash the sink with plenty of water.In the case of a gel, it comes down only to ensure that pour it into the sink and rinse later.However, in some cases, the gel must be kept in the tube for several hours, so it's best to do this procedure at night.
Chemical fighters clog also suitable for preventive measures.Once a month, clean the pipe with the help of these tools, and you do not know what a blockage.
How to fix clogged toilet in
Perhaps this is the most unpleasant option obstruction, but with him you can fight.Suit the same methods as for cleaning the sink, but should take into account several important points.
Plunger to clean the toilet bowl should be large diameter, otherwise it will fall into the sink or will not adhere to the walls of the bowl.
also experienced housewives are advised to plug all the gaps between the plunger and drain rags to increase the vacuum.
plumber's snake is able to help you out in this unpleasant situation.Disassemble in this case, nothing.
Lower the rope in the hole toilet and rotational movements push it deeper.In contact with the barrier make a few moves back and forth.Rope more convenient to use together, if you're an inexperienced plumber.
With simple clog suit and hot water.Fill a large amount of water in the drain pan.But do so only if the liquid leaves.