laboratory ball mill for wet and dry grinding of various samples of materials used in the production of small or conditions, or a special laboratory.This equipment is used for the preparation of small batches of material, and for the simulation of grinding material.It is important to pay due attention to the time, which emphasizes that it is imperative that the hardness of a material that is ground, should not exceed the hardness of the walls of the grinding bodies and grinding drum.
Specifications laboratory ball mill
ball mill laboratory, as well as all the equipment has its own specifications.They are described in the data sheet for it.There are examples of some of the most important.For example, a ball mill can simultaneously dissolving the material in a corrosive or flammable liquids and produce it to pray.In this case, this equipment must be equipped with an engine explosion-proof, oil-resistant or acid-liners and the pulley and belt drive rolls - made of aluminum alloy.Ball mill must always be protected from many kinds of explosions.
The principle of
laboratory ball mill produced only in two versions:
1. desktop version;
2. floor option.
This device consists of a frame welded from steel profiles and painted with powder paint, which must be installed two shafts.A first shaft rigidly fastened to the frame of the mill and the V-belt associated with the motor.The second shaft should rotate easily in the bearings.
Depending on the size of the diameter of the grinding drum is necessary to adjust the distance between the shafts.Ball mill working according to the type of filling mleyuschimi bodies crushed products or liquid drum.Thereafter, the drum lid is closed.The lid must be sealed and reliable.It also operates on the principle of large industrial mills wet or dry milling using in its use istirayusche-impact force mleyuschih wall and on the material of the drum body.
Completeness mill
Laboratory mills are equipped depending on the choice of the customer steel, porcelain or made of stainless steel grinding drums for the different volumes.The inverter is set to change the speed of rotation of the drum.Without it, the instrument is tuned to the average number of revolutions per minute.The mill has a standard kit, which includes a frequency converter drive, milling drum and in sufficient quantity mleyuschie body.Laboratory ball mills begin their work due to the electric motors, which protect from overheating and overloading.
If you want to buy a ball mill, then for more and detailed information, refer to sales consultants who in turn will tell you all about the mill, and thereby help to make the right choice.
