When you need to perform accurate longitudinal groove or other recess on some parts usually used milling machine.Such equipment is in any plumbing or carpentry shop.Regardless of the material to be treated, whether it is wood or metal, the operating principle remains the same: the rotating cutting edge and the workpiece come into contact, while moving relative to each other, there is a recess at the desired depth of the material with the required configuration profile.
Hand router, unlike a stationary machine, takes up little space, it is relatively inexpensive, and the use of it can be considerable.A device of this instrument, in general, is simple, it consists of "head", i.e. the node in which the electric motor to the control circuit and the spindle shaft, and the part which guides the thread, i.e. milling.At the same time, by selecting the manual mill, it should be remembered that for the successful use of the instrument is a guide and locking assembly is of paramount importance.Preference given to an instrument with a maximum number of cast parts as a platform, and a parallel or stop revolving.As for the "head", its quality is directly dependent on the mechanical parts.
engine has a direct drive, it is a high speed, shaft speed is usually 30 thousand. Vol. / Min.They can control the electronic circuit, providing smooth acceleration and stabilization of turns in the case of increasing load.These additional functions to protect the manual router from overheating, and power grid - from congestion at peak current during transients.
quality of work depends on the uniformity of movement of the cutting tool relative to the workpiece, so the base should be smooth.Another factor in the successful implementation of the tasks is the lack of distortions and backlash, so the rigidity of the holding unit is so important, especially because it has a depth adjustment.
collet, which is attached to a manual cutter mill includes a collet itself, transmitting the force of the drive shaft cutting tool insert and the clamping nut.
About inserting deserves mention, on its inner diameter choice depends cutters.She dresses directly on the shank of the drive shaft.
Now that is created and for which the whole structure.Set of cutters for the hand router is usually included in the box, but it may be that it is not enough.In order to make the right choices, we should remember that they are the teams in which the configuration of the profile may vary depending on which blades planted on a pig-base.
addition, mills are divided into high-speed and hard, the second is more durable, but also more expensive.
type of work also affects the choice of cutter.It can be kromchatoy (for processing edges) figeriynoy (for forming decorative edges), Pazo-of thorns (to create connections tongue and groove).
in the capable hands of a manual router can successfully replace several carpentry tools.
