If you - the hardcore gamer or suddenly realize that your computer is no longer as young as I would like, you will be interested to know how to install a graphics card.This unit is responsible for the output and processing of all graphics, so replacing the video card in your computer will provide a significant increase in speed.It is also possible situation when your old card is burned or broken, and to cause the master fundamentally do not want.Then this article will help you learn how to install a video card on their own.
Before installing a new device in your computer, be sure to find out the two options your motherboard, avoid buying the wrong set of devices:
1. Power
If you buy a graphics card of a higher level, check how much power is necessary forher work.In some cases you have to buy a new power supply, as the old will already be unable to "feed" your new card.Usually enough block 300W, rarely need to 400-600 watts.
2. Graphic Port
At the moment there are two types of ports: AGP and PCI-Express.AGP is mainly used in quite old motherboards.If you are the owner of a new system unit, feel free to take a compatible PCI-Express graphics card.But if you're still in doubt, be sure to check out the datasheet motherboard.
If you understand this, you understand how to install a video card, you will be easy.To begin with, that will remove the old graphics card.To do this, first go to the "Device Manager" of your system, get the tab "Display Adapters", go back to your video device and select the context menu.Select "Properties", go to the item "Driver" and click "Delete."Do not worry if your monitor suddenly turn off, it means that you have done everything correctly and you can safely shut down your computer through the power button.
now proceed directly to the mechanical extraction of the graphics card.To do this, remove the cover of the system unit, unplug it by pulling the cords connected to the socket, locate your graphics card, remove the mounting screws and remove.Then insert your new graphics card, but in any case not use excessive force.If a card is chosen correctly, it easily enters the connector.
After a successful update, you must still install the drivers for the video card, because it can not work absolutely correctly without them.If you buy the kit in the store, you are likely to get a special CD with drivers, with which you can easily install them.But if you bought a card with it, then you have to look for drivers on the Internet on the official websites of manufacturers.
After installation you want to test your graphics card.For these purposes, I would advise you to program 3D Mark and AIDA64.With the first program, you can learn a lot about the health of your card, and the second is used to monitor the temperature (to avoid overheating).I hope everything goes smoothly and you can proudly say that you know how to install a video card in any computer.
