Members at the first road car on the road face, usually with two problems: smooth starting and switching gear.In fact, both processes occur in the same way - in both cases, the gearshift lever is operated, the gas pedal and clutch.However, these stages has its own nuances.And to figure out how to switch the speed of the car, today we dedicate this separate article.
At what point any transfer include?
First we need to understand at what point you need to switch from a lower to a higher transmission.In this, we always help the tachometer, speedometer and, of course, the sound of the engine.In the last noisiness, we pay special attention to not be, but on the evidence of switches scales - just the opposite.On the question of when and how to switch the speed of the car, really no big deal.If the tachometer needle came out with green scales and slowly begins to move into the red, then we switch to a higher gear.For convenience, you can use speedometer.In this case:
- switching from the first to the second speed is carried out at a speed of 20-25 kilometers per hour.
- from second to third - at 35-40 kilometers per hour.
- from fourth to fifth - at a speed of 60 kilometers per hour.
Some vehicles have a sixth gear.In such a case, you should focus not only on the speedometer, but also on the tachometer.The principle is the same: when the value is beyond the green scale (here you just feel a distinctive roar of the engine), include increased speed.A switch to a lower with increased is the same, only in reverse order.If the speed is reduced, and the tachometer needle goes over the green dial to the idle speed, then it's time to include the clutch and change gear.
How to switch the speed of the car?
In order, at which point any transmission should be included, we have already dealt with.Now turn to the second aspect - the rules switch PPC.In fact, the question of how to switch the speed of the car, too, nothing complicated, just need to understand the algorithm of actions.And it is in these phases:
- Releasing gas and we press on the clutch smoothly.It is important to disable the first and second pedal depression occurred with minimum waiting.In practice, you will catch the moment.
- translate gearshift lever according to the scheme drawn up handle to the desired position.But before you switch the speed of the machine, you must first move the handle to the neutral position, and after 1 second to include the right gear.This is done in order to reduce the load on the gear transmission.
- Then gently release the clutch, and we press a little bit of gas.
- Once you have completely released the clutch, strengthen the pressure on the right pedal.
- Continue CPR until the next shift.
At this stage, the question of how to switch the speed of the car, can be considered closed.
And finally, a little secret: PPC can switch modes without complying with the order.That is when the car braked sharply, not necessarily pull the handle from the fifth to the fourth, then the third and second gear.Feel free to turn on the desired speed - the main thing that the engine speed is in the green scale.
