How to choose the right gate for the fence of wood and other materials

click fraud protection

fence is required for any building.He clearly encloses the territory and does not penetrate it to anyone other than the owners.Thus, a private space with entry through a gate or gate.

How to choose the gate to the fence?What you need to know?

wicket is a small door, which is installed in the fence.It is necessary for entry to the territory, which is installed along the perimeter of the fence.It is made of wood or metal.Usually prefer a very simple design of the gate.It can be seen throughout the countryside.The gate at the gate can be closed or a simple lock on the hook latch, if you do not want to install the lock.

What material is made

wicket before selecting a gate for the fence, pay attention to its combination with the architecture of the house.The gate must be reliable and durable.It is therefore important to determine exactly what material it is made.They can be wood, the surface of which should necessarily paint the paint and impregnated with an antiseptic.Well, if you choose fir or pine.The gate to the wooden fence should fit in style to the very gates.The width of the gate wings is usually from 90 cm to 150 cm.

wicket to the fence of wrought iron should not be placed in a wooden fence.It will look great with forged metal gate with stone fence and an iron gate.It should be noted that recently the Gates of metal are very popular.They look beautiful and decorate your entire view of the hedge.This iron is expensive, so most of the gates and the gate is made of cheap low-carbon steel.To protect the material from corrosion, it should be a good prime and paint with paint.Still I would like to advise not to pursue cheapness.Remember that Gates should be very robust and reliable.The style, design and size they must be combined with fencing.

gate in a fence made of wood and its installation

It is useful to know how to make the gate in the fence themselves.When installing the gate classical enough to produce two supporting pillars of iron or wood.They first need to soak substances that protect the material from rotting.Then you need to put the gate between the blanks of the desired diameter.Before installing the gate to the fence, all its parts must be aligned.You can then proceed to the temporary bonding shtaketinami horizontal pillars in the amount of three or more pieces.To iron poles to fasten the gate wire and a wooden nailed.The pit should be dug for the poles are larger than the width of the gate.At the bottom of the pit lay broken bricks, gravel or crushed stone.

assembly of the gate

Note the presence of the gap.It must be between the ground and the bottom rail gate.Reinforce the pillars, struts fixing them in the pit.Then prepare the mortar and pour it into the pit, well rammed and giving good stability pillars.Once the solution is tightly adhered, you can start to fasten hinges and set them to the gate of the fence.If the fence is installed only the gate, and the gate is not present, you can do in the fence on the street side of the fence easily removable span.This will ensure that the entry of the machine.

Before installing the gate to the fence, to determine in advance its width.It is desirable that it is allowed to enter the territory of the area on a bicycle, a motorcycle, a baby stroller, etc.. The entrance to the area to do a solid coating.

for gardens best option is to install the swing gate with a wicket.