When cold days are approaching, many people are wondering about how to install a stove in the garage with his hands.The main disadvantage of many of these structures are their rather big size.However, you can find something compact, but it is quite powerful.This is particularly important in this case since the gate is often open to the garage.
electric or gas devices are not suitable because they consume a lot of fuel.They are not efficient and economical.The ideal option would be a design that works on solid or liquid fuel.
There are a few key parameters that you should pay attention when choosing a solid-fuel furnaces garage.
- Firstly, it should not occupy a large area.In addition, if the heater in the garage is not installed permanently, then at the warmer months it can be removed from the heated space.
- Secondly, a high level of fire safety to not follow the clock stove.
- It should also have a good power supply, since the appropriate level of heating should be different.
- fuel for the furnace can serve even the usual rubbish that constantly accumulates in the garage, freeing you from this rubble.
There are several variations of such devices.
«stove»
Classic stove in the garage of metal.It works on wood.This welded metal container in which there is a door to load fuel and chimney.Its advantage is simple structure, and it has a lot of drawbacks:
- short term operation due to burn metal.
- controlled combustion process is difficult: it quickly or burn or not burn because there is no pull, and the low quality fuel.
- low efficiency, which is why a lot of heat emitted through a tube.
Nevertheless, it is very popular due to the low price and ease of manufacture of self.
oven buleryan
For it is used as fuel all solid that can burn (as wood and peat).This oven is becoming more popular.After all, if one tab of fuel to heat the room it will be for 10 hours.Its efficiency - approximately 80% due to two combustion chambers.This important feature of this design.In said furnace burning flap is adjusted, and the room warms up pretty quickly.
use buleryana Features:
- desirable chimney made of sandwich pipe, which will deliver feed from condensate and soot.
- The height of its floor must be at least 20 cm, and it must have a base of heat-resistant material.
- better kindled the stove in the garage paper.Later added to solid fuels.
oven to "working off»
Similar to burzhujku, but is used as fuel waste oil.The device is its simple but reliable.How this stove is installed in a garage with his hands?It's pretty simple.
need two containers connected by a pipe in which there are many small holes.The bottom part - is right and the fuel tank and the boiler.In the container, and is produced by heating the fuel.The top item - a pipe to the tank - a combustion chamber and the heating element.These furnaces may be heated to 700-900 degrees.Lower the volume of her - 8-15 liters, which is enough for 10-20 hours of work.This vessel is a hole-cap, which draws the air and serves as a filler neck, and controls the power of combustion.For the production of this furnace is used only dense metal.Flues also need to be strengthened, as the temperature sometimes reaches 250 degrees.All items should be made removable due to soot in the channels that you want to clean at least once a week.Kindle it is quite simple.For this it is necessary to pour one liter of fuel in the tank bottom.Then, insert the filler opening and ignite the paper.After 5-10 minutes, warmed tanks, and the combustion is transferred to the tube.
After all is said it should be noted that home-made stove for a garage in the manufacture requires special knowledge and skills, and if you build them wrong, they can be dangerous, that is, in this case it is better to turn to professionals.
