Access Point and a router is often a serious problem novice users.According to the producers themselves, setting up a wireless network - a simple affair.In fact, everything is much more complicated and can introduce a bit confusing even experienced users.Let's try to figure out how to connect two computers to the network, select the access point, etc.Many so far removed from this issue that even the existence of the network gives them positive emotions, not to mention its quality.But we can make this connection reliable, so I think that you need to know this little secret.
It often happens that the main stumbling block is the standard Wi-Fi, which makes it difficult to transfer media.Only the compliance with the standard 802.11n can provide the highest speed when transferring files and viewing HD-video.The transfer rate of the present compound is equal to the standard 300 Mbit / s.If necessary, in this speed no, it is better to choose a network standard 802.11g, which provides up to 54 Mbit / s.It will be enough for the Internet connection speed.
Oddly enough, but one, and the second and third network standard Wi-Fi is at a frequency of 2.4 GHz.Setting up Wi-Fi network in view of this a little bit easier.But there are other problems.Because most microwave ovens, cordless telephones and wireless extension interfaces operate at the same frequency as the interference level increases significantly.There is another problem, which is related to the environment in which the signal passes - and this is nothing like structural elements.It may even be the man himself.Router desirably positioned in such a place that other objects do not interfere with data transmission.It is not enough to know how to connect two computers to the network, but it is important to know how to make an optimal environment for the transfer of data between them.
to connect the router and the computer you want to use a special cable.In order not to carry out extra work in the future, make sure that the connection is established, and the computer will recognize the router.You can make a mistake in choosing the right entry and exit, so if there is no connection, then do not hesitate to re-examine this fact.The main document, which is based in the Wi-Fi settings of the router after connecting to your PC or laptop, is a guide.There's clearly stated all the addresses that should be administered.
The next step will be the introduction of data, namely username and password.The instructions in this regard nothing is specified, as well as on how to connect two computers to the network, but this is normal.Many routers use a standard pair of admin / admin or admin / password.If you povariruete them, then maybe you have something happen.
to breed on the Internet, you must use a network cable "Internet" and connect it to the external interface on the router.Following this, specify the settings of the router configuration interface provider, which is in agreement.If there is no, then you need to contact support.Ask about how to connect two computers to a network, it is not necessary.On such questions you will not answer, but the case is clarified.
Configure network between two computers, is much easier than you think.It should only connect the cables, and voila!With Wi-Fi, too, everything is quite simple - you need one of the devices to create a network, and the other to connect to it.Data in the second case slowly, but if you want to connect computers at a greater distance - it's the only way.The main thing - do not be afraid to spoil anything.Try, connect, solve and you will succeed!And if not, for this there is a button "Reset" on the back of the router.
