Thermal insulation of wooden house - an important component of its comfort and convenience.How to insulate wooden house?This question (heat insulation in a wooden house made of logs or log) affected even at the earliest stage of planning and design of the house.
insulation materials are divided into separate types:
- mineral and ecowool;
- glass;
- foam and Penoizol;
- plaster for thermal insulation;
- thermal insulation paint.
under construction wooden house can be somewhat deviate from the design decision, but the question "How to insulate wooden house" should strictly adhere to building codes and recommendations.After all, the recommended insulation materials in the project are inclusive of individual settlements on the heat loss in a building under construction.
Mineral wool is available in the form of slabs and coils.Mineral wool has good insulating properties and fire resistance.Ecowool serves as insulation voids between the individual elements of the ceiling and wall surfaces.
Fiberglass is made by means of molten glass.It has negative characteristics in terms of fire safety.
foam has excellent thermal insulation properties.And it is very easy to assemble and easy to transport.The foam sheets have a variety of sizes in thickness and density of their individual performance.These parameters must be considered when calculating the heat losses.Penoizol is a liquid foam insulator.
thermal insulation plaster with special additives perlite is used in conjunction with other building materials.
same insulating paint contains a filler, water, an acrylic dispersion and various additives.
interior house warming necessarily include walls, ceilings, windows and floors.How to insulate wooden house and the inner surfaces of the walls?First, do not make insulation of the walls from the inside, because the layer of insulation covers a certain percentage of usable floor space.Secondly, while wall surface is constantly exposed to different temperatures, which leads to its rapid degradation.And the way, moisture got into a heat insulating layer, nullifies all taken protective measures.
Where to start and how to insulate wooden house?To begin with loft.As a rule, the ceiling is used mineral wool and foam.First mounted pergaminovy layer for waterproofing surfaces.In a fit mineral wool or foam, fastened with rails to the joists.Then superimposed on top of another layer of waterproofing.It is important that the gap between the sheets of less than 1 centimeter.All slots are filled with foam.Thermal insulation of the ceiling for greater reliability is done in two layers, and the top clapboard.
How to insulate wooden house outside in the field of wooden windows and doors?Both outside and inside the premises for wooden windows and doors are special rubber seals or tubular heater with sealant.
as insulation for the floor surface is used polystyrene.It fits directly on the old surface.Next comes the reinforcing mesh top and poured cement.
insulation wooden house outside made using styrofoam plates and special glue, as well as reinforcing mesh, the outer coats of plaster and resin.How to insulate wooden house outside?First, polystyrene plates are attached to the outer surface of the building using an adhesive and the metal dowel.Then follows a layer of reinforcing mesh.Further, the outer surface of the primer is carried out and on top of it a layer of polymer plaster.It is important to take into account that at present polymer plaster plays the dual role.It will be able to warm wooden house and its outer surface, as well as improve the appearance by the colors of the home design.
insulated wooden house is not only important in terms of comfort and convenience, but also economically beneficial to the purse of the owner of property.After all, the timely implementation of the measures on warming the wooden house will save significant amounts of money at the expense of unnecessary and unplanned expenses for space heating, the overall service life of the building.
