Every modern car now staffed cigarette lighter.This part is good because it can connect absolutely any electronic mechanism, whether it is a mobile phone charger or a portable compressor.The mechanism is a kind of "outlet", which connects additional device capacity up to 12 volts.Also for security reasons, many motorists have become a special cigarette lighter fuse.But what protection it gives to this mechanism, and how effective is it?
functions
As we have noted before, he's cigarette lighter - is a small "socket", which can be connected to any device.However, if the voltage exceeds the maximum permissible limits, then it is threatened breakdown of the whole mechanism.To avoid this, there is a cigarette lighter fuse.In the case of increased risks it stops the power supply to the electronic device.Both mechanisms in such a case remain unharmed.
Which devices should not be connected in order to fuse the cigarette lighter did not work?
There are no secrets.What matters is that the system does not connect too powerful devices, such as a coffee maker, electric and Minisink.When these devices are in use, the cigarette lighter fuse may work in a few seconds, turn off the power.Well, if it's over that way.When these elements are connected to the cigarette lighter without a fuse, it is possible that part simply closes or burn.Therefore, the maximum that can be connected to a similar "outlet" - a cell phone charger or laptop (ie low-voltage devices).
Where is the cigarette lighter fuse?
This element should be placed directly in the relay and fuse.For convenience, the diagnosis and repair of some motorists put it in a small plastic box in the passenger compartment under the steering column.In general, this element can be positioned in any part of the car: in the trunk, under the hood, and even under the back row of seats.What matters is that the mechanism is in the relay.
What if cigarette lighter stopped working?
First note the fuses.Often, they provoke the failure of the entire part.But what set the fuse on the cigarette lighter to eliminate breakage?It's simple.We reveal the first block on the back of the box and the cover is an appropriate part number, following the instruction manual.He alone, therefore, pointless to look for other items.If you are visually determined that it burned, replace the part.By the time it will take less than a minute.
However, if the cigarette lighter fuse proved serviceable, do not panic.Look at the state of similar parts located outside of the "socket".These fuses can also fail.But if it has no effect, you need to look failure in the wiring or in the cigarette lighter.
