In our daily life we are regularly confronted not only with computer, but with all kinds of headset to him, and, in particular, with the microphones.What you need is a device that does not make sense to say, but how to check his work and learn more about it would be superfluous.So, how to check the microphone?It is clear that a complete inspection can do it only by a specialist as it needs and specific equipment and the specialist knowledge and experience.But usually, the standard test with the simple test can make any man.
try to begin to understand how to check the microphone on your computer.If you connect it to the last, you do not hear anything, that's not an indication that the device is faulty.It is likely the problem lies in the wrong connecting a microphone or an incorrect setting up a computer program.So first it would not hurt to check, to which output connection is made.At the exit there is a microphone corresponding icon.Also, this connector can be painted in pink.If it's done correctly, but the sound is still there, try to run the mixer, the settings which you can find a map of all inputs.Then make an additional device to display microphone input and adjust its parameters.
How to test the microphone, if it is connected and configured correctly, but the sound is recorded?The reason for this can serve as a time fault of either the microphone or sound card.Check that the device is operating or not, it is possible by connecting it to another computer.If the device and it will not work, the question remains: it is defective, it must be repaired or replaced by another.If the other computer microphone to record sound, then check the settings and the condition of the sound card on your PC.
And now a little about how to check the microphone in the headphones.Again, we must first of all, to draw attention to the fact whether it is connected.Once you have verified that the plug is connected to the device, painted in pink, press "Start" in the menu that appears, select "Control Panel", and then - "Hardware and Sound".Next, click the "Audio" and select "Audio Recording".In this tab, there are a microphone output sound card, which is set by default.If you find that you have two choices, select the one that suits you best (FRONT (located on the front panel) and REAR (on the back).
Now tab "Sound Recording", press the "Volume", andcolumn "Microphone" is required to check the box. Use the slider should be set to the volume to maximum. If need be, in the future, you are always in the same way to be able to make it quieter. Close all tabs and check again whether to record the microphone sound.
Probablyone of the most "sick" in order - how to test the microphone in Skype. Make it easy enough. First you need to connect a microphone to the computer, and then run the above program. Select contacts «Echo / Sound Test Service», do the test free call,process which serves to record a brief message after the tone to it and then listen to it. If the microphone is set up correctly, the recorded message, you will hear.If you do not hear anything, then in the tab "Test Settings" to adjust the volume.Then again make a call and check the device.
Through this simple "maneuver", how to check the microphone, you can always be aware of how well it works, and if something happens to solve the problem.If all else fails, then one way out: the service center, since it may be a mechanical failure, and no computer settings in this case, the benefits will not do.
