In our country there are a number of state standards, which should be organized according to the analysis of the quality of products in the enterprise.The term "product" GOST R stands for 9000-2008, as a result of the process of transforming inputs into outputs.According to GOST R 9001-2008, they are subject to quantitative evaluation and characteristics of the products should be measured and carried out their monitoring.That is, each organization must spend to send products to the consumer and to confirm its acceptance of its fitness for use.The GOST 15.309-98 states that these requirements apply to all national economic output, in addition to the courts or other species, which have special requirements.That is, the analysis of the quality of products involves holding her measurements and tests in the amount prescribed by the regulatory technical document for a particular type of product (GOST, OST, TU, etc.) or the contract (agreement) on its delivery.
analysis of the quality of products is carried out at parties.They are in the process and the production process and quality control process should equally be identified by product name, batch number, date of its manufacture or release.These data should provide full traceability from the receipt of raw materials, quality control of raw materials, technological parameters of the production, all manufacturing and logistics operations, which she was subjected throughout the life cycle, as well as data on the personnel involved in the manufacture and quality control.These requirements are derived from the standard GOST R 9001-2008, which speaks of the need to approach the process in order to increase customer satisfaction.
At the stage of release analyzes of product quality, which is called acceptance.It is divided into two categories of tests: acceptance and periodicals.The set of tests and issued a document on the results of the quality of products, confirming its compliance are guaranteed for the consumer that the product has no deviations from the established requirements.Routine tests are carried out on each batch, periodicals - with the frequency stipulated in the documents establishing the requirements for a specific type of product.All test results must be identified by name and parameters of the test method, traced by the type of instrumentation and characterization of materials used for testing.
Since all production stages operate according to current technological regulations or other regulatory documents, the requirements to ensure the conformity of products (quality of raw materials, technological parameters of manufacturing, packaging, storage and transport, until its delivery to the consumer) should be performed.Therefore, verification of purchased raw materials and a quality inspection carried out in accordance with GOST 24297-87 products approved plans and schedules, or input control.In contrast to the acceptance inspection, the raw material can not be checked on all indicators of quality, and only those, compliance with which is required to have the effect on the quality of the final product, ensures the safety of the production of or compliance with the rules and regulations on labor protection.
Product requirements and the requirements for measurements and tests, which analyzes the quality of products, set the standard for the products.The tests must be carried out by qualified personnel.The results confirm the personal signature.The reliability of the results provided by the current system of quality management laboratories or the technical service.
