gables called section of the wall, bounded by the roof where there is an attic or attic.This building is an important element of the building.Build a pediment with his own hands is not so easy.However, it can be done, if you do the advice of professionals.
Variety and function design
Gables come in different shapes - oval, triangular, trapezoidal or other complex configurations.Their height can vary from 70 cm to 1 m, when the attic is uninhabited, but if planned attic, it takes up to 2.5 m. Most gable roof is a continuation of the walls, and sometimes after being finished.In any case, such a structure has to fulfill the following functions:
- Keep the attic of rain and wind.
- retain heat.If this is the living room, in this case it is necessary to thoroughly insulate the attic gable with their hands.
- be reliable and stable, because the construct supporting joists and stiffens the roof.
- decorate the house.Effectively decorated this building is a distinctive feature of the building.
Building attic gable with their hands
First you have to determine where it will be installed mauerlat as gable wall should be raised to 2 rows of masonry.It must always be borne in mind, building gable with their hands.The height of this structure should also be increased by two brick.Main wall thickness is divided into two parts, resulting respectively of the gable being built will be equal to half of its value.Next, you need to install the mast where the planned maximum height of the roof.If done correctly, the rake will be in the middle of the beam.At the top of the mast is attached twine.Both ends of its tightly tensioned and fixed in the corners of the walls.A triangle (if mnogoskatnaya roof, the masts being installed in the area of available angles and the roof with the help of string is determined polyhedron).The edges of the walls, too, should look like a triangle.For the smooth slope first bricks laid without fastening solution.Then, at the extreme bricks cut corners.Thereafter, a second clutch has to make a solution.Then the rib wall zaravnivayut cement mixture - and said the construction is ready.
How and what can be oblitsevat gable with their hands
Most often this facility trim chipboard or clapboard.In recent years, the market there are many modern materials (plastic, corrugated board, siding, etc.).As a result, it is possible to significantly reduce the cost of the lining.For example, the gable of corrugated board with his own hands and installed is quite simple.Siding is also very suitable for lining the design.For any finishing material essential element of preparation is the calculation of the area.Accuracy is not hurt.First calculated the area of the pediment.Then cut out a finishing material.
sewing gables with their hands
This process should be carried out after installation of sheathing.It is made of aluminum profiles or wooden bars 4 x 4 cm. If the attic is residential, between parts crates lay the insulation, and then superimposed advocate protection film, retaining heat and not giving moisture to get inside the structure.
