Modern apartment repair often involves the replacement of the floor.Replacement coverage is more favorable in price and look more aesthetically pleasing.Grouting (tie) - an important element to the arrangement finish.Therefore, people outline the repair, often the question arises of how to pour the floors in the apartment.The filling technology there is nothing complicated in the case of properly executed action problems should arise.
Upon completion of the walls can start leveling floors.You can hire builders to pour the floors in the apartment.The price of these works is not too large.However, everything can be done independently.Pour the concrete floor of the apartment is not so difficult.
Beacons
Please install guide beacons, which will be carried out and leveling the floor.Their proper installation will depend on the evenness of the surface of the screed when casting.They must be installed along the entire room.There are a few rules of the installation: the first beacon should retreat away from the wall by 30-40 mm, and the rest - about 1000 mm from the previous one.During the construction can not do without cement.After all, it is the basic building material for a large number of construction and finishing works.To fill the need a good cement.Later on it will be installed guide rails.
Pillow
To ensure a high level of the apartment thermal and acoustic insulation, prior to pour the floors in the apartment under the screed is laid a layer of expanded clay, gravel or sand.You also need to build a layer of a special plastic film, which will provide a vapor barrier.Installed beacons should be checked with the help of the level.If they are installed smoothly, you can start the next step - pouring cement mortar floor.
How to pour the floors in the apartment
cement mixture is poured on the floor, moving from the corner of the room.To better distribute the solution, it is necessary to level it using a spatula or trowel.This allows to control the thickness of the layer.It is important to make sure that all slots have been filled, so that during the shrinkage of irregularities have arisen.After 30-40 minutes after pouring the recommended trowel and level the surface completely.Filled with sex reaches full strength after 28 days.Drying it for about 3 days, depending on the room temperature and other factors.
There is another option.First, you can create a tie, and to eliminate the irregularities and defects in its surface, top it with a layer of self-leveling floor.This will not suffer with the rule.Self-leveling floor mixture diluted with water to the consistency of liquid sour cream or thick yogurt.Then they are taken away on the bottom of the needle roller.
That's all there is to know about how to fill the floors in the apartment.Then you can start laying finish.The three most common material for flooring - laminate flooring and linoleum.Each has its advantages.The most popular of them - laminate.It looks good and fairly economical price.Parquet looks solid, but its price is higher than the linoleum and laminate.Linoleum is relatively inexpensive, has high durability and is 15-20 years.
