We rightly tend to think that our house - it's not just a fortress, but a place where you can relax after a very hard day.
a significant role in giving the dwelling-house of beauty and comfort belongs used during repair finishing materials for the ceiling, which today there are thousands of species.
They differ not only by the nature of the used raw materials for their production, but also according to their functional properties, not to mention the price.And so it is no surprise that the choice of materials for repair sometimes turns into a sophisticated torture.That there is only one stretch ceiling mount to the ceiling, on which the majority of people simply do not know!
What do you need?
If you set out to carry out this operation on their own, you have to accept the fact that you will definitely not be able to do standard tools.So, you need to buy a special spatula and heat gun, without which stretch ceiling mount to the ceiling is simply impossible.
However, not everything is so terrible: a ladder, drill with a set of drills, dowels, construction quality level, as well as a knife - are available in almost every home.In addition, be sure to prepare a vacuum cleaner, masking tape, as well as a sufficient amount of plastic film, which you will need for sheltering furniture.
Preparing
In the case where a living room, a stretch ceiling mount to the ceiling is better not to start without preparation.To do this, hide all the furniture film (remember, we are talking about it), to protect the floor or wrapping paper of the same film, paying special attention to areas just outside the walls.
install on baguette
Any tension ceiling mount to the ceiling starts with the installation of durable and lightweight frame, which is mounted on the perimeter walls of the room.In another way it is called baguette.
You need to know whether the "native" ceiling has some irregularities.If you pasted wallpaper in the room, you might want to know about the difference of height at different ends of the room.Finally approved the lowest point of the ceiling accept this value for the level at which is mounted prints.
Mounting it done with dowels.Of course, this should be as straight as possible, constantly referring to the performance level.
We stretch!
And now the fun begins.First you need to carefully spread sheet temporarily tucking the edges of the prints.To do this, use a spatula.The web is then temporarily fixed the clip, which must be purchased in advance.
Then Ceiling Mount stretch ceiling shall enter into the most crucial phase.It should be as gently as possible to fix the canvas on the corners, avoiding the formation of wrinkles.If done successfully, you can start to fix the trim, while trimming the excess fabric.
finished with this difficult and dreary affair, you can start warming up the entire ceiling with a heat gun.Residual wrinkles stretch, cover will be perfectly flat.
Of course, there are other types of mounting tension ceilings (including without using a heat gun), but they all require a deep professional knowledge and great experience.
