Fashion for tinting machines in our country there was a very long time.At first, this process produces only expensive and prestigious sedans and SUVs.But after a while the price for this kind of tuning has declined substantially, and such a "luxury" could afford even 20-year-old owner of VAZ.But, despite this, since last year, more and more drivers are wondering "how to remove the tint from the glass."Why did it happen and what are the ways to remove the dark film?Answers to these and many other questions you will find in this article.
What does the law say?
Under the legislation of Russia, from July 2012, all drivers who have violated certain rules tinting shall be liable to a fine or confiscation of number plates (if the film is not removed from the machine for more than a day).As soon as the ban came into force, all garages without exception, raised the price of services for the removal of the film several times.
But how to remove the old toning without recourse to the workshop?
Remove the film, fortunately, it is possible and without expensive devices and tools.His hands did so many drivers, with the result pleased everyone.Now we consider one of the most effective ways to eliminate the film from the side and windshield.
Tools
Before removing tint from the windows, cook some tools, or without them the process would be impossible.So, for this you need a knife with a thin blade (best to take office).Also for this process you need a special tool: the solvent liquid to wipe the glass (go normal, "Mr. Muscle" and ammonia, diluted with water at a ratio of 1 to 3), and a rag, which in the end to wipe traces of glue.
How to remove the tint from the windows?A phased process
To start, you need to lower the car glass (if the side) down to 1/3 of its height.Next, using the stationery knife to gently pry the edge of the film.It is important to remember that the best place to start is at the corner of tinting or any other place where the glass has a bend.After that you need to make a slight gap between the film and the very surface of our window.The size of the gap should be such that you can comfortably take your fingers for this element tuning.
Highlights how to shoot with tinted windows, we have considered, but consider the fact that the film may break under heavy use, and then you will have to repeat the whole process from scratch.But slowly it is not necessary to remove it, because in this way you leave more glue on the surface.
After all tinting removed, you will notice that the glass traces of glue.Small or large they are, whether they will still have to resolve.And do it better with a cloth, previously sprinkled with glass solvent and wait 2 minutes.After that you can safely clean the glass, completely eliminating traces of toning.
Everything, at this stage of the process of removing the film completed.Now you know exactly how to shoot with tinted windows.Be assured, then, no state inspector did not write you a fine for non-compliance of the above law.
