Tiles - this is a good lining material, but work on its installation has traditionally are quite expensive that many people simply can not afford.Save precious family budget can be.And then the question arises: how to lay tile?It is necessary to understand.
Laying tile is a very laborious work that requires maximum accuracy and delicacy.If the initial stage to allow at least some inaccuracy, then a major impact on the outcome of the work.So, let's understand how to put a tile.
to work you need a well-defined set of tools: building mixer gidrouroven, notched trowel, tile cutter, Bulgarian small size with a diamond wheel.Materials needed for the work: tile adhesive, grout, distance wedges and crosses.
tile laid on the prepared surface to be perfectly flat.The surface requires rid of dust, and then thoroughly primed.If you want to revet, and the floor and walls, you must first process the walls, as this will save the tiles on the floor of unnecessary pollution.On the floor surface should retreat distance equal to the thickness of the tiles with glue, and leave space for the expansion joint.It is best to use for this rail.It will not allow the tile to slide under the resulting load.
If we talk about how to put a tile, you must first mix a paste.The solution should be plastic, but not liquid.After that it should stand for about five minutes to mature and then it should be stir again.Next, you need to pick up a tile and it determine the direction of its installation.For this purpose, the back side of it, there are arrows.They should all be in the same direction.Smooth surface notched trowel is used for applying the adhesive to the surface of each tile, and gear - to remove his remains.Spatula required to hold perpendicular to the surface to get the same height of the ridges.
Talking about how to lay tile, it should be said that it is necessary to continue to set in place, and then press it to the wall by slightly tapping on its surface.Also mounted and all subsequent blocks, and the level used for the control of their position relative to the vertical and horizontal directions, as well as host of all elements in a single plane.If there are minor deviations, they can be corrected by the simultaneous pressure on several levels fragment.The gaps between the tiles must be installed remote crosses.
remaining rows are stacked in the same way, and all the seams are supplied crosses the intersection to get an education distinct straight lines.
If we talk about how to properly lay ceramic tile, then it is done similarly, but with the amendment that all works are carried out on the floor.Near the wall tiles neatly dive under the already pasted on the wall.This allows a smooth seam around the circumference.
If we talk about how to lay tile, it is worth noting that a few days after the work is done grouting.They need to clean up dust and residual adhesive and then rub the part with a rubber spatula.One day after this can be cleaned tile.
