Probably every car owner is not indifferent to what looks like his iron friend.And with the appearance of various scratches and other defects refinishing problem restoration of the former type of body.But, unfortunately, apart from scratches, the car still afraid and rust, which appears as a result of prolonged use of the car in places with high concentration of moisture.Such an attack may be subject to absolutely any car brand, absolutely any production (the only difference in time).But in any case, after the discovery of traces of corrosion on the body of its iron friend should immediately take measures to eliminate them, otherwise rust will spread over the entire surface of the vehicle.In this article you will learn how to remove rust from the car.
Why is this happening?
In fact, the reasons for the occurrence of corrosion is more than enough, and it can not only be riding on wet areas.The main reason for their appearance is the following: the metal is adversely affected by both of two elements - water and air, then under his painted as small dents or scratches, which are harmful to your iron friend.
What if there was rust on the body?How do I remove it?Preparation Phase
Initially, the entire process must begin with the preparation of the surface.To do this you need to clean the old paint, which is already covered with potholes, with the help of sandpaper, and, of course, the very rust.This is done using a conventional polishers.Then the surface must be degreased with alcohol or petrol and places the entire seal body with paper or adhesive tape to make the colorful dust is not harmed even whole ink.Then you need to buy a can of primer and paint that matches the color of your car.
How to remove rust from the car?A phased process
After our surface preparation process took place, we can safely get to work.So we put a thin layer of primer paint and wait a few minutes until it dries.So you need to do two more times to finally consolidate the layer on the surface.After applying the third layer is necessary to put the vehicle into the garage for 12 hours.
How to remove rust from the car?The process of applying paint
After the desired time should be carefully clean up the site of application layers using fine sandpaper.Further, in order to remove rust from a car, you need to go to the paint work.At this stage, we will apply a coat of paint on the surface of the place where there was corrosion.Doing this work should be only a single layer, or the appearance of smudges you can not avoid.Then leave your vehicle in the garage for a day and then remove the adhesive tape and paper, covers the entire body parts from unwanted exposure to dust primer, and start full operation.
So, we figured out how to remove rust from machines with their own hands.
