Transportation Motorcycle owners often brings a lot of problems.If the ATV and motorcycle with sidecar yet somehow you can attach to the rope, then to a single motortechnique this is not an option.In this case, it can only help the trailer bike.
Trailers for the transportation of motorcycles meet the most different designs, ranging from proprietary equipped with fasteners, and finishing with a homemade, sometimes representing an engineering marvel.However, in any case, the foundation construction platform is mounted on wheels.Corporate trailer for motorcycle can have complete different set of fasteners, tilt, folding ramps, and other add-ons.Homemade devices in most cases is a conventional wooden or metal platform, located on the axis of the wheels.
on trailers can transport all types of motor vehicles.But in order to deliver to the destination expensive sports motorcycles, the transport platform must be equipped with special devices.They allow you to make the transportation equipment more convenient and safe in terms of the safety of the vehicle.On the trailer to transport a motorcycle set the following equipment:
1. The trough-stand.It is installed in the trailer.It serves as a guide for placing the motorcycle on the platform.
2. Trough-gangway.It is needed for the rolling of motor vehicles in the trailer.
3. The support legs.They are attached to the "stern" of the trailer and prevent rollover structure when loading.
4. Ties and fastening straps.They are fixed on the platform of a motorcycle.
Note: ATV trailer must be equipped with two runners-similar.
Before installing additional equipment on the trailer, it should be required to perform a number of operations, namely:
• Secure the vehicle handbrake.
• Set the wheels of the trailer wheel chocks.This will prevent spontaneous movement of the structure during the loading of the motorcycle.
• The rear support legs mounted on the rear of the trailer and secure.
rear mount racks produced are in complete special pieces - trapeze and collar.The process of mounting racks in the following order:
1. Racks are fixed near the rear of the trailer.
2. Clamp lowered the rack extends all the way.
3. Clamp tightened.
to immerse motorcycles on a trailer to transport a motorcycle, you must open the tailgate fully trailer.Then, install and secure the stand to the bottom of the trailer for motorcycle.The connection is performed by bolts.After that set the gutter-gangway.The chute motorcycle driven into the trailer to go.Lashing straps, ties bike firmly fixed in the body.For this purpose, there are special cradle hinge.Loading completed.Now gangway removed and put into a trailer to transport a motorcycle.She needed when unloading.
Note: in order to secure the support under the motorcycle, you need to pre-drill in the bottom of the trailer required number of holes.Their number depends on the number of transported art.Used ATVs produced in the same way, only instead of a gangway on the tailgate secured two.
