foundation must first be a reliable support for the home.In order for it to be strong, the use of only one of the concrete are not enough.This design is mandatory reinforced.This method of construction allows to build devices that can withstand as the great mass of the walls, and the pressure of the soil during the spring frost heave.
to manufacture wire mesh used steel bars with a thickness of 6 to 32 mm.They can be both smooth and corrugated.In order to join them into a unitary structure, used mainly in two ways: welding and binding.In the construction industry the most commonly used first as a grid is supplied ready to plant, where to make a similar design easier.
In the private home ownership and the construction of small structures such connection method can be regarded as inappropriate, because you need a lot of welders to quickly make on-site grid.Therefore, in such cases, the second method generally used (mated).Next, consider how to knit reinforcement.
use this method even better because welding weakens the structure.In addition, the joints may occur in the future rust, which will make the reinforcing cage is not very reliable, and it will certainly affect the durability of the foundation and the building as a whole.So, how to knit reinforcement for the foundation?
First of all you need to prepare themselves rods and wire.The latter typically has a diameter of 0.8-1.2 mm.It was cut into pieces with a length of the order of one to two meters.There is as answers to the question "how to knit reinforcement."The easiest way is through the installation of pliers.This wire is folded in half, threaded rods connected by and links.Further, extra ends are cut by means of cutting pliers.
Often independent building wizard wonder how fitting knit crochet.It is another fairly common method, which uses no pliers, and a special device that can be purchased either in the shop or be made independently of the wire.This tool is a hook, which picks up the loop binding wire folded in half.Its ends are also wound on the hook after it is passed through a pre-mating bars.
So "how to knit reinforcement, using the hook" - a simple question.In both cases, the delay produced by the torsion wire hook.Factory models are equipped with a special handle to facilitate this process.Instead, it can be used as a screwdriver.Wherein a hook is inserted into the cartridge instead of the screw.Using a hand-knit, you can get the design is very flexible and elastic.These disadvantages include the possibility of displacement of nodes in the process of casting the foundation.
There is another method in which a special type of wire used: clamps, connectors and fasteners.In this case, it is not necessary for binding to use any tools.All the work is done directly by hand.Using such elements, you can accelerate the process of mating.At the same nodes will get much stronger.
So now you have some idea of how to knit reinforcement.Having to do this work, you yourself will understand perfectly throughout.The process is simple and quite feasible.
