At night, city streets are filled with twinkling lights.This light is fascinating and attracts everyone's attention.This effect is achieved by using a special device - a stroboscope.It is often used in several technical uses, such as for automobiles, as well as in other fields.The scheme of the device is not so complicated, so you can make a strobe hands.
Background
stroboscope was invented in the 19th century Austrian scientist Simon von Stampfer.Such a device is called at the time phenakistoscope.This device consists of two rotating disks: on one image were plotted, were made in the second slot.By rotating the light falling through the cracks, creating the impression of self-moving figure.At the same time the Belgian Joseph Plateau Stampfer made the same discovery and made the stroboscope with their hands out of the cardboard discs.The invention of this device to start projecting films.
use strobe
device such as a strobe light is used in several areas.For example, in research processes periodic nature, taking measurements of the amplitude of movements and others.In addition, this device has found application in medicine - as strobolaringofona for people with damaged speech.
in automotive engineering is used to test and set the initial ignition timing.LED strobe lights mounted on the radiator and the bumper of the car to attract the attention of drivers on the road.
device also is widely used in outdoor advertising in places of entertainment in discos and in other areas.
Types strobe
There are several types of devices: this basement, and beztsokolnye superstroby.Superstroby can be distinguished from a distance of three kilometers, whereas other types of devices visible only within one kilometer.
circuits of these devices at the moment, there are different types, but they are not so complicated.Strobe lights produce their own hands is quite simple, with at least a basic knowledge of electrical engineering.
Manufacturing unit
Depending on the destination device, the principle of its production is slightly different.We offer you the easiest way how to make their own hands for the stroboscope LED backlight handle transfers on the car.
For this you need an LED lamp, knife, soldering and glue - a better way to use the adhesive gun.Then we act on the plan:
- Remove the shift knob speeds, clear the upper part of the glass paint.
- Then polish it with a felt with a special paste.
- makes a hole in the handle for connection of lamps with power.
- The handles make the recess for the lamp by removing unnecessary details.
- With soldering devices connect the wires of the diode and a pen.
- fix a lamp on a stick with glue.
- assembled and installed by hand.
use of such a device makes it easier to operate a motor vehicle.And if you make a stroboscope with your hands, you can save considerably on the purchase of finished devices.
