One of the most common building materials has recently become corrugated.It is used to build temporary structures, cladding of buildings, to create the roof and so on. D. At the same time, there are many varieties of this material, which can significantly expand the scope of its application.Well it turns out, and such a structure as the gate of corrugated board.The price of the final product goes significantly cheaper than using any other material, and the reliability, durability and appearance make this indispensable material.
choice of materials
to manufacture the gate is necessary to choose the right material.It has to be light enough to not load the loop and thus durable.Many instructions that teach how to make the gate of corrugated board, to recommend the use of square tube frame.However, experts believe that it is best to use the metal corner.The fact that in addition to its light weight it has high strength and is very convenient to use.As the skin is to use the same type of corrugated board, from which made fence.Otherwise, you can use any suitable type of material.
Making frame
When creating a framework necessary to remember such a thing as stiffeners.The fact that the gate of corrugated board should not get its strength only through the skin.Sheet metal must be fixed to a solid base, which is mounted with all the rules of geometry.When creating a framework necessary to take care of mounts, locks, handles and hinges.
Painting
After the skeleton is ready, it needs to be painted.This is despite the fact that the gate of corrugated board - the product is resistant to corrosion.First, apply the primer layer, and after it dries, can paint the entire structure.
Profiled
After the paint has dried, mounted on the frame of sheet metal.The gate of corrugated board can be made with special screws that will fasten the profile.However, it is best to use special rivets.This installation process will be more time consuming, but in the end product will be a very robust and resistant to penetration.Then paint the gate.This process can be avoided, if applied to the metal sheet has printed pattern, or the owner is going to leave the metal in its original form.
Installation
gate of corrugated board is mounted on hinges with special gaskets made of soft metal.It is necessary to leave a small gap, which will hinder the process of friction of the door at the time of shrinkage.It manifests itself even in such structures.For added convenience, the service top hinges drilled a small hole into which must be periodically filled with lubricant.Also it is necessary to take care of such a device on the valve to ensure its smooth running.
