After the completion of the house there comes a stage when you treat your possessions with great pleasure.However, there is no blind area of the building, early dream of long-term operation.Some believe the construction phase plus, but this is a misconception.It is necessary to learn how to make a blind area around the house to your home as long as you are happy.
duration of operation of any building is directly dependent on the state of its foundation, and it accounts for a significant load.Heavy autumn rains, abundant snow melting in spring, severe winter frosts - all this can create significant problems homeowner.External basement walls begin to collapse under the influence of water, which causes warping of the structure and the appearance of cracks.That is why before any builder task is not only to build a building, but also to make sure that the water from the walls assigned.Blind area - this is the most simple and effective way to solve such problems.Let's look at it in detail.If we talk about how to make a blind area around the house, it should be said that it can be done in one of two options.
first option involves the use of paving slabs.It is worth considering how to make a blind area around the house in this way.It is called a rigid, since in this case, a cement slurry which permits a fixing tiles in position.To get started you want to determine the size of the area from the blind area.Its minimum width should be 50-60 cm, but it must be taken into account design features of the roof.Blind area around the building has to go beyond 20 centimeters.Shovel width dug trenches to a depth of about 30 centimeters.The surface should be treated with herbicides allowing plant roots to destroy.Further, the bottom was covered with geotextile, and should leave allowances on the side walls of the trench.It is filled with 15-20 centimeters of fine gravel, then sand, and all the compacted.Thick mortar must be prepared to put on "the pillow", and it can be placed on top of the tiles.Blind area should stand up a couple of days, while it should not affect the load.When the solution has hardened completely, it is necessary to prepare a liquid composition, which are coated all the seams.Tiles to pour cold water, leave it to stand for another couple of days.
If we talk about how to make a blind area around the house, you need to consider a second option.It is simple.Digs the trench required width on its bottom geotextile laid on top of which you can pour out of the ground.Next comes a layer of coarse sand or fine gravel.You can ram it all, and put on top of the paving stone or tile.Seams between all the elements are filled with sand.This blind area will serve not only to protect the foundation, but the footpath around the house.
