The ceiling in the bathroom of the plastic panels is considered to be the fastest way of finishing.It looks attractive, you can hide defects and mask ceiling communication.Next, we analyze the advantages of the material.The paper will also describe how to make a ceiling with his hands in the bathroom of the plastic panels.
Benefits
finishing material used for the production of panels, is environmentally friendly.It does not emit or absorb odors.The ceiling in the bathroom made of plastic has a glossy smooth surface.Behind it is convenient to take care of - just wipe with a damp cloth and ordinary detergents.In addition, the surface can embed different lamps.In addition, the ceiling in the bathroom of the plastic panels can be decorated plinth.
Classification
It should be noted that there are two types of finishing coating:
- Direct seamless.
- simulates wooden battens or Block Houses.
The second option is more suitable for dressing rooms in a country style.But in the high-tech interior looks better seamless coverage.When installing the joints will be practically invisible.
Calculation material
before a plastic ceiling in the bathroom with their hands, you must determine the right amount of consumables.The panels are available in various lengths and widths.However, there is a popular size.The most common panel width of 25 cm and a length of 4 meters.To calculate the amount of material necessary to calculate the surface area.To do this, measure the width and length of the room.The values obtained are multiplied.To add the result to be 10%.This reserve is needed to compensate for the material to fit the size.
Crate
ceiling in the bathroom of the plastic panels mounted on the pre-fixed frame.It can be made of pieces of wood or metal profile.If the first option is used, the use of softwood.Elements of crates should be well dried and treated with water-resistant compositions and antiseptics.If the timber is wet, then over time it is deformed.Experienced professionals do not recommend the use of wood for crates.The ceiling in the bathroom of the plastic panels are mounted on the best metal profile.This crate is not subject to strain and create a more rigid and solid foundation.Fixing elements are the same as setting the framework for plasterboard.Pre-marking is done using gidrourovnya.
some nuances
Home piping to mount the timber on the perimeter.In this regard, the first value - it is the actual perimeter of the room plus 3%.The carrier elements are arranged along the long wall at 30 cm from the walls and steps of 60 cm. Fixing all elements lathing is done with screws and dowels.Fixing wooden beams is performed in increments of 30-40 cm. If the rail length divided by the distance it is possible to calculate the number of screws.To this number should be added 3% (to marry).Attaching themselves directly to the sheathing panels made with galvanized screws (25 mm long) with a press washer.The recommended amount of clamping elements - about 200 (16 per m2).
Additional elements
mount plastic panels produced in a special PVC profile with guide groove.Need is also ceiling (start) plinth.The amount is equal to its perimeter of the room plus 5%.These elements are of two types.The first option is a combined ceiling moldings and start profile.Second - rail with a groove for installing a separate floor.
The ceiling in the bathroom of plastic panels: Secrets mounting
installation of coating in a strictly horizontal plane.In this connection, must first produce the labeling.To do this, use water or a laser level.Once the layout is ready, begin fastening elements crates on the perimeter.To secure the timber used dowels.They are secured in predrilled hole puncher.Bruce fixed increments of 30-40 cm. From the wall element should withdraw 30 centimeters, parallel to the ceiling fixed bearing member.The next bar is fixed at 60 cm. On the opposite wall is also necessary to withdraw 30 centimeters.
Adjustment of lighting: general information
Before making the ceiling of the bathroom plastic panels, it should be noted, and make holes for lighting devices.In addition, it should lay the wiring for the crate.Next, a detail of the mortgage for the light.Before you make the ceiling in the bathroom of plastic panels, it checks the availability of all electrics.All wires must have reliable isolation.
ceiling of the bathroom plastic panels: motazh own hands
mounted on the perimeter beams fixed PVC profiles.To do this, use screws with pressshayboy.Step fixing - 30 cm. For smooth docking profile it must be properly trimmed.To do this, use joinery miter box.With the help of this device element can be cut just below the angle of 45 degrees.Sheathing the ceiling in the bathroom of plastic panels, adjustment is carried out by elements of the required size.To cut the desired length, use a knife and a building area.Pencil point line, hold on the front side of the blade and the plate is breaking.The first plate mounted spike towards the wall.The element is fixed with screws to the bar pressshayboy crates.Previously it recommended to cut the spike knife.The next panel is fitted is inserted into the groove of the first and tapped gently to complete its installation in place.The following items are installed the same way.The only thing to remember is that the lights in the panels under the pre-made hole.Installation of the last element do not have to trim only the length, but also width.
nuances of lighting
When using mortise luminaire wiring for them divorce immediately after the installation batten.Choosing a light bulb, it should be noted that PVC - fusible material, so heat it more than 60 degrees is extremely undesirable.By setting a ceiling of plastic panels in the bathroom with their hands, you should choose to 35W halogen or incandescent bulbs up to 60 watts.When wrapping elements in which lamps are installed at first tried on the surface.They mark the location of the lamp is done.Then cut a hole and insert the lamp.Then the panel is put in place.To post you can use copper wire 1 mm.For connecting joints used terminals.It will be indispensable when using different wires.Over time they may oxidize.To prevent this, just use the terminals.All wiring is displayed in a box mounted on the wall.
Duplex design
second and the next tier ceiling sbiraetsya similar to the first.Through the profile, which limits the second level, and cut off the panel.Sharing tiers vertical section covers the strips cut from the panel.Below the junction corner of the ceiling height is masked by a decorative element, and on top of baguette.
Additional information
If the border is expected to use a foam moldings can not secure the perimeter of the profile.If metal lath is used, the strength of its attachment to hangers only be sufficient to withstand the relatively low weight of the panels.In general, set a ceiling of plastic with your own hands can a person who does not have much experience in the decoration.
