Everyone who wants to transform your home, faced with the necessity of internal and external repairs.One type is a plaster finish.This process - an integral part of any repairs.But the question arises, how to plaster the concrete blocks.
Before you start, you must check for the presence of surface pits and irregularities.The next stage - a wall covering primer.Once the entire wall is covered with primer, let it dry out a bit, meanwhile, spread a dry mixture of plaster as directed on the package, and you can start working.But for those who are unfamiliar with this mechanism, it is better to seek help from a specialist who knows how to plaster the walls of the foam block.When working with this material should take into account some features, ignorance
that will not bring you the desired result.When working with a brick wall, it notes that it absorbs twice as much moisture.As a result, moisture is evenly distributed between a mixture of plaster and brick wall, ensuring reliable coupling.On the walls of the foam block, everything is much more complicated.How to plaster the concrete blocks in this case?The wall absorbs all the moisture and plaster is a risk to stay dry and crumble.To avoid such problems, you should use a primer.But you can do without it, sprinkle enough grout wall plaster.This method is more reliable and more economical compared with the other.Now that you know how to plaster, you can proceed to the next step.Without waiting for the complete drying of the liquid must be applied to the plaster wall.With this method increases adhesion of plaster to the wall, as the moisture comes into contact with the concrete blocks is only 20%.Any remaining moisture is distributed uniformly over the surface of the wall, as well as with a brick wall.
Now a little about the primer.How to plaster the concrete blocks after using the primer, if you select between a liquid mixture of plaster and primer is still the second option?Then you should know that it is better to avoid acrylic plaster.Its disadvantage is that it deprives the wall moisture, causing all of it accumulates in the plaster.But over time the moisture remaining on the plaster layer is evaporated, and the wall becomes dry.It does not get wet balance, which is necessary for good coupling.As a result, cracks and flaking plaster.
Since plaster dries for a long time, it is necessary that the room had a good ventilation and reasonable temperature.Such a temperature range of +3 to + 30 ° C.
From the above it can be concluded that the only true and less expensive solution is to pre-spraying the liquid solution on the wall plaster.
That's basically all the features of the application of the plaster on the walls of the foam blocks.Operating with this knowledge, you can easily answer all the questions concerning how to properly plastered concrete blocks.This will make the wall surface a smooth, beautiful and flawless.The entire process is not as complicated as it seemed at first glance, but still requires time and effort.Technology applying the plaster is fairly standard and not very different from the usual, which is being developed for most materials.
