In today's world to be living with the amenities.Today rarely seen family, who manages everything old methods - the toilet is outside, furnace heating system, use only cold water and a bath instead of a bathroom or shower.Now, the design of the house, people tend to create a cozy and comfortable corner to each room was equipped with the necessary amenities.This also applies to such elements as sewage in a private home.Many residents set toilet in the house and spend the sewer, which means comfort and home improvement.
If no central sewage system, the sewage system in a private home can be performed independently.Sewerage system should be organized at the beginning of the construction phase, but if the house is already built, you can rebuild some of its premises.In a private house waste water is not always disposed centrally and substantially individually.There are several methods to perform a process such as sewage in a private home.This can be a filter pit, cesspool or septic tank.Each method is determined on the basis of the geological features of the area, and has its own peculiarity.
Septic Tank is the easiest way to organize the sanitary sewer system.In this case, the need to have to occasionally clean the pit, you can do it yourself or take advantage of special services.Sump can be installed in any home with any soil.It can be made of iron, concrete, wood or brick.Normally the water drain in a private house has its depth and breadth, a cesspool must be a minimum depth of two meters, and the length and width - 2 or 2.5 meters.In the other side, where there is a hatch, it should be inclined hole.To guard against unpleasant odors from the pit, the hatch has to be dvuhdverochny - the first door is performed on the overlap, the second - above ground level.If the hole will be made of cement or brick, in this case, the interior walls covered with plaster.
Next filtering ability is well.This drain in a private home is most suitable for small houses.Make a filter pit of brick, concrete and reinforced concrete ring.The depth of the well must be greater than the sump, of about 3 meters and the width 1.5 - 2.5 meters.Such a device in a private home sewage is widely used only with moderate water drainage.The bottom of the outer walls of the well and need to fill up with gravel or gravel one meter.Interior walls must be plastered using grout.
The final version of the sewer - a septic tank.There are several settler (typically 2 or 3) with overflow.This is the standard form of sanitation, the depth of which is 2.5 meters, width - 1.5 meters.You must know that in the septic tank wastewater stay only 3 days.Unlike other kinds of sewage in septic tank can be supplied from a separate ventilation air that filters waste water.
for proper sewage devices, you must comply with the rules and standards in construction.Therefore, there is such a thing as SNP outdoor drainage, with which you can safely carry out their activities.Also, special permits for sewage equipment will help to avoid misunderstandings with local management and administration.
Market extensive sewer systems.Today you can pick up any kind of sewage system and for any money.To correctly select your system, you must consider the following factors - how many people live in the house, the duration of use of sewage and what will be the volume of waste.To drain in a private house passed efficiently and without any problems, you should consider all of the above points.
