When replacing windows always have an additional question of exactly how to make the slopes of plastic windows.The options so far are many, but not all of them successful.Consider them starting with the cheapest in terms of the material used.
Slopes for plastic windows can be done in several layers of plastering.After the appearance of plastic windows it was the most popular and familiar way.
plaster layer is applied in several layers according to the technology.The final coat is covered with paint.Actually, nothing new, and it would be good, if not a few "but" found during the operation.The main problem - insufficient reliability of the connection of plaster and plastic and lowest thermal insulation plaster.This leads to the formation of cracks, insulation violation of the slope and to the effect of "crying" windows, in other words, the formation of condensate.This method is currently losing its popularity.In addition, he labor-intensive, requiring a lot of time to perform.
replaced by the first method came various options, implying pasting slopes.These include adhesives for the slopes of plastic windows (pasting a thin plastic), plasterboard finish (top layer - plastic).Both of these methods, with significant deficiencies, did not take root in the market of building technologies.Drywall is not suitable for finishing slopes because of the instability to moisture, and often thin plastic can not withstand the stress occurring due to temperature changes.As a result, these slopes are short-lived and quickly lose their visual appeal.
also use polystyrene foam.The disadvantage of this method - the fragility and rapid loss of appearance by changing the color.Moreover, this material is easily prominaetsya upon exposure.
are proven plastic slopes for windows made of double-sided sandwich panels.They have sufficient indicators of moisture resistance and vapor resistance.In addition, these slopes are durable and beautifully decorate the window opening.Installation does not require a lot of time.
Note that sometimes prompts you for the slopes of plastic windows from the unilateral sandwich panels.This option is rejected.The cost of these panels below, but the quality of the output is much to be desired.They do not possess adequate hardness and prone to deformation.
also slopes for PVC windows can be made of plastic sheet, which is also quite viable and widely used at present.It is important to choose a quality finishing material and not to save on the thickness thereof.Optimally choose plastic 10 mm.
If you do not plan on doing for the slopes of plastic windows independently, it is important, as well as performing any other work, to find a qualified staff.It is safest to find the person or team on the recommendation of friends.If possible, go purchase the material themselves.
