People who have the means to build a country house of a good, it can afford to build a pool in the country.Very nice on a hot day to luxuriate in your own pond.No need with all the supplies and a change of clothes in the car to rush to get to the river or pond water of questionable purity.And if we are to make the roof and hot water, then swim in your own pond will be in any weather.How to build a pool in the country?You can order the construction of its specialized organization, but you can build your own hands.In any case, before building a swimming pool, it is necessary to determine its location, the bottom profile, depth and size.
optimal depth for adults is considered to be 144 cm. If you intend to jumping into water from a height of 1 m, the depth should be at least 230 cm. And if jumps will be performed from a height of 3-4 m, the depth of a pad for jumps do not need toless than 315 cm, and then it gradually turns to a depth of 144 cm. The greater the depth, the more expensive it will cost construction.How to build a swimming pool, if the family has small children?Or adults who have yet to learn how to swim?How to build a pool, so that it could enjoy the opportunity to swim for those who already know how to do it?
If both types are available, the depth is selected with a smooth transition from 80 cm to 130 cm, if there are swimmers, the transition depth is increased to 144 cm. Of course, knowing how to swim, you need more length.Here are the restriction of two factors: the size of land on which to build a swimming pool, and the state purse.For those who are limited to the first factor, and who do not have problems in the second, there are widely used in Western countries the device - counter.It creates a strong counter-current, and the question of creating a long track to swim disappears.
When the depth of the profile, the shape of the pool and its location, as well as the drainage system and water supply and solved the question of how to build a swimming pool: with the help of a specialized organization, or with your hands, you can begin to excavate.Mark up the perimeter of the pit, taking into account an allowance of 0.5 m of its alleged borders.The depth of the pit ideally should also have an allowance of 1.5 m. The walls of the pit must have a slope of not more than 7 ° to prevent fraying.The bottom leveled, compacted, and it keeps sand cushion.Next, you waterproofing the bottom.Walls made using shuttering, which can be either wood or plastic or metal.The gap between the ground and filled with concrete formwork.For the strength of the walls are reinforced with steel mesh.Pre-laid water flow, that is, the drain pipe is installed.Further, the bottom is also filled with concrete.When filling the bottom of the same reinforced steel mesh.We must take care that the net inside the layer of concrete.The bottom and the walls are traditionally faced with ceramic tiles.
Now with the development of polymeric materials used for waterproofing synthetic film.They have long been used abroad, and they have proven their reliability.If used for waterproofing they then used a special manufacturing technology pool bottom and walls.To install a waterproofing is better to consult specialists.
