At first glance it may seem that the installation of the chandelier on the ceiling - this is a pushover, which can fulfill everyone not applying to this great effort, but I hasten to assure you that this is not true.For example, the ceiling of your structure is too weak hook attachment that you want before you hang a chandelier, replaced by a more powerful, or may not be.
installation in concrete ceiling chandeliers
order to hang a chandelier and be confident in the reliability of its fastening in the concrete ceiling, you will need to use the hook spacer, it is also often referred to as anchors.Its diameter should be 10 to 12 mm.The first drill hole in the ceiling in the planned location of the chandelier, then insert the anchor into it by tapping achieve a secure fit.After doing these activities tighten the anchor so that the sleeve are crawling on the tail, which is located at the end of the thread of the anchor.Because of this expansion will occur throughout the length of the sleeve, which will ensure reliable fastening of the anchor.In the last step you have to hang a chandelier on the hook and attach it to the wire.
Installation chandeliers wooden ceiling wooden ceiling
allows to make procedure with screws for wood that only need to spin into the surface.This can be done using a special attachment to the ceiling, which are included in the chandelier, or screwing the threaded metal hook.
Installation chandeliers in plasterboard ceilings
If you have this option, a great solution to hang the chandelier will be the use of special anchors for this type of building material, the so-called "butterflies".Hang a chandelier having a weight of more than fifteen kilograms on plasterboard ceiling strictly prohibited, for this you need to use only the basic concrete ceiling.In this case, you will need threaded rod with a diameter of no less than nine millimeters.The length of the pins will depend on the depth of the space between the ground and plaster ceilings.It will also need to purchase Drop anchor and screw-nut.
So, first drill a small diameter hole in the drywall and then basically the ceiling, remembering that the hole in the concrete should be no deeper than 10 cm. The next step is to wrap the anchor to the stud and its installation byScrolling light, has done earlier in the hole.And the last stage - the twisting of the studs, and should take into account that it must be done until it stops.
included Chandelier with light weight, includes ceiling mount makes it easy to produce a fixation dowel-nails with a diameter of 6 to 8 mm, but this is on condition that the ceiling is concrete, but if he is a wooden, then thisscrews are used.
So before you enter into a search engine query Internet about how much it cost to hang a chandelier, at first it will be useful to get acquainted with the material of the above article.
