Toning - the easiest and most affordable way to change the look of the car.On the pros and cons often argue, but that with proper selection of such a film can make cars more attractive and original, talk more often.So let's say you decide to put on a glass of his "iron horse" dubbing film.Where to start, and in general, how to tinted windows, we try to understand.
before dimming to purchase coverage, find out what glass can be subjected to change in haze, and which are not.According to the law of the Russian Federation blackout windshield film coefficient of haze is less than 85% is prohibited.Besides, getting to another country, you obey its laws, regulations, and so what, and how tinted windows, may vary.Before you travel better clarify this point, to protect themselves from unnecessary problems abroad.
Let's say you have decided to buy the film and start converting your car yourself.Action is really simple.The material with which you will work, consists of a transparent polyester film (and it is attached to the glass), coated with a special coating on the metal base.Toning is fixed on the inside (!) Of the glass, thus reducing the likelihood of physical damage coverage darkening and protects it from various weather phenomena.
learn how to tinted windows, many are beginning to refer to the process without the necessary seriousness.In fact, everything looks pretty simple, but it is only a first impression, but it is misleading.For a beautiful and high-quality results have to work.
procedure begins with dimming glass that must be degreased and cleaned the mud from the windshield.This should take the time, as where tint is even under speck, after a short time the air bubble begins to form and this leads to peeling of the coating.Do not forget to remove the glass from the radio and cellular antennas.If, in this case with front and side windows are all pretty simple, with the rear will have to torment.If you encounter a situation where you do not know how to carefully remove the brake or damage the heater, and not well know how tinted rear glass, it is best to consult a specialist.In this case the effect has been a great and long, which is what everyone wants.
If you were able to visit at least once in a professional studio, then surely you have seen that the masters work with removed from the car windows.Arguing about how to properly tinted windows on polustole or do without dismantling is not necessary.These masters know what they do, but ordinary car owner to remove the process-plant can bring a lot of troubles.From this it follows that we do not shoot will, and so we will use the template.For him, we need tissue paper.We put it to the (rear, for example) glass and carefully draws the outline.Cut is applied to the film mold and cut off all unnecessary.Now we ready toning, exactly corresponding to the desired size.
about how tinted windows and what to use as an adhesive composition, provided a lot of information, but the most common method is the one that uses soapy water.Plus, such a solution a few.Firstly, when the tinting is placed on a glass surface, a liquid-wetted, it is quite easy to move on the surface to make the necessary corrections, etc.Secondly, it is cheap and reliable.About
issue corrections tinted film, in particular a large area in the instruction "How tinted rear glass" should also make one more point.Unlike wallpapering, which compares with toning many "masters" though the film is stretched from the center, but it should be done very carefully, as even a small force can cause deformation of the coating.Tighten the film needed for the tips.
Knowing how tinted windows, do not expect that everything will turn out right the first time.Keep in mind that the more expensive a film is easier to work, therefore, the choice should be done not on the basis of "so-goes", but it is better to buy quality stuff.He is not afraid of scratches and is at least 5-7 years longer than cheaper counterparts.Good luck to you!
