On light there are many useful things that we use every day.Among them recently took - apron.Mistress wear it in the kitchen, the students used as a supplement to formal attire.Gardeners in his small stack tool, and kids clothes, the clothes stay clean.This article of clothing can be simple, elegant and even seductive.So if you still do without it, it's time to learn how to sew an apron.
Let's start with the easiest option.Consider how to sew an apron without coquette.We need a wide satin ribbon belt, bias binding, and a small piece of fabric, size 60x40 cm.Cut off from the strip of material width of 15 centimeters and cut out of it two pockets of arbitrary shape.Processes them on every side piping.Cloth folded in half, draw with chalk on the bottom and the side edge of the festoons.Apron cut out of the loop.Okantovyvayut piping.
Mark up the location of the pockets.Impose them on the apron, stabs needles and pritachivaem.We note on the product and satin ribbon middle.Laying a few wrinkles on upper
Now a little complicate the model and look at how to sew an apron with a yoke.For this purpose, the previous model must also carve small size arbitrarily shaped yoke.If you decide to make the bottom of the apron as festoons, and the flirt should be done in the same style.We would be enough for a small piece of material the size of 25h20.Sections coquette treat piping.From it also makes the top strings.Staple separate bottom and top apron, note them middle and fold the wrong side inside.Grind and turns seam towards the bottom.Impose satin ribbon closing seam and pritachivaem finishing line to the bottom of the skirt and basque.
for any model, you can use the remains of material or unwanted clothing.So before you sew an apron, review old stuff.Among them you will find a suitable tissue pleasant colors.
If my daughter needed a festive clothes on the last call, you should know how to sew school apron.For this perfect lace fabric.As we take the oblique Bakey finishing.Our product will consist of a bottom yoke, long Halter adorned with ruffles and belts.We cut out the bottom of the apron 40x40.Slightly round off the bottom.
Measure the resulting semi-circle.We cut out the bottom of the shuttlecock apron, 6-7 centimeters wide.The length makes enough to lay a small assembly.Treat the one edge of the shuttle piping.The other end of the thread to gather.Fold right sides from the bottom flounce skirt.We grind and process overlock seam.
Now cut out the size of 15h18 cm flirt.The upper section of okantovyvayut.Kroim one shoulder strap.It extends from the waist, neck, and back through to the other side of the waist.In the interior sections stitch coquette.From the outside sewn frill.Halter consists of two identical parts.
pretreated shuttlecock piping.We are doing it the assembly.Put the shuttlecock between two pieces of straps, folded right sides and grind.Wrenched straps out and straightened well, the inner seam line of decorative paving, retreating 1-2 millimeters from the shuttle.
internal sections folded the straps on the inside of one centimeter.We invest between coquette and stabbed with needles.Paving decorative stitch at a distance of 1-2 mm from the fold.Putting the bottom skirt with yoke and nastrachivaem them a satin ribbon, which acts as a belt.
Sew the apron easy.It takes a little patience and imagination.The finished result will please you very much, even if it will be your first experience of needlework.