planning façade cladding or laying the flooring in the house or on the street, many opt for porcelain.This material is an order of magnitude superior to conventional ceramics in terms of strength, while retaining the decorative qualities.At the same time, such a tile close to the longevity of natural stone, but it is much more practical to install.However, to form a smooth coating without additional treatment of the material is not always possible, because of which there is a fair question about how to cut stoneware tiles in the home without the use of tools and other specialized equipment.
Features cutting porcelain
complexity of processing of stoneware tiles due to its characteristics.This is a fairly solid material, which is structured like a stone.Accordingly, for its cutting tool should be chosen with great care.Porcelain is a cross between a granite and ceramic.But in the case of stone without the help of professionals can not do, if you need to get a perfectly smooth side.With ceramic tiles things are not so bad, and it is possible to be limited to a standard set of cutting.Decide what will be the cutting of granite tiles in the home, you can immediately consider tools such as Bulgarian, Tile, Jigsaw and so. On. The processing is quite laborious and time-consuming, but it is the only way to get the best result without outside help and financial costs.
Preparation tool to work
No matter what tool will be used in the work, you must check its technical serviceability.Even at the professional level knowledge of how to cut the stoneware tiles at home, will not help if the equipment is in poor condition.This is especially important if you plan to use the device for a long time in storage.Thus, the first check the integrity of the cutting blade.This may be diamond rollers, saws, crowns and other abrasives.At the same time check the quality of the sharpening and the locking system from which will directly depend safety.Next, evaluate the reliability of fastenings, nuts and bolts position.If you use the tool, check all contacts, and in some cases, and grease.
Cutting grinder
If the choice fell on this tool should immediately prepare for the fact that the working process will be accompanied by a large amount of dust and dirt.In addition, it must be complied with the security measures - availability of gloves and safety glasses is a prerequisite for preparation for surgery.Angle grinder should have a special case, which protects against debris material.
Depending on the intended result, you can determine how to cut stoneware tiles at home grinder - for example, it can be curly or straight-processing.In the course of trying to not necessarily cover the entire thickness of the element, as the tiles can be easily broken and created by the split.However, this line must be deeper than with a conventional tile cutting.Among the disadvantages of the use of grinders can highlight the need for special working conditions and relatively low quality of the cut.The first negative due to the fact that there is a lot of dust and debris, and the second is related to the brute processing diamond abrasives.
Using Tile
popularity of this method is the fact that the Tile is designed specifically to work with materials such as ceramic and porcelain.The quality of the cut in this case higher than when working with grinder, but under normal operation of the equipment.Despite the prevalence of electric models, it is useful to know how to cut stoneware tiles manual tile, because this method is more accurate.But it is important to note that it is desirable to cut once, as multiple attempts to obtain and execute a welcome break can ruin the look of the element.
Technique with Tile
When the initial incision is ready, should continue fixing tiles, lift the handle of the tool and put the foot in the middle of the line so that its focus was directed to the tile.Next, click on the knob and step up efforts, achieving fault.The parameters and the quality of the resulting cuts are determined not only by manipulation, but also the structure of the porcelain, its composition and hardness.If the edges of the tiles were extra chips, they can be easily removed with pliers.
Processing porcelain glass cutter
stekloreza amount of force is not so high compared with the described tools, so it is advisable to use this method only in the case of a small amount of work.You can now go to the question of how to cut glass cutter stoneware tiles for at least worthy of a result.
Roller glass cutter diamond element must have to handle the slab material.Tiles before work itself is lowered into the water for about 30 minutes, to facilitate cutting.Next item is placed on a smooth surface.The incision should also perform only once with strong pressure.Cutting part you must ride on a pre-applied line from the farthest point to itself.As a result of this operation on the coating must be formed porcelain flute - she will act as a basis for future fracture.To facilitate the demolition, it is necessary to form a line to put a thin wire nail or a match.By double-pressing the tiles are separated into two parts.
Cutting jigsaw
This method also requires a lot of effort and most suitable for modest amounts of tiles intended for cutting.Unlike alternative, this option involves sawing the ceramic granite.By the way, knowing how to cut a jigsaw stoneware tiles allow to make similar operations hacksaw.In addition to patience, you should stock up and replaceable cutting blade which will almost certainly require work with heavy materials.
first step is to fix the saw blade.According to the intended line on the tile should undertake a jigsaw so as to form a smooth cut as possible.To eliminate the possibility of overheating of the tool, it is also necessary to moisten the material.This is how the electric model, but there is a hand-held jigsaws, which, with appropriate skill and effort can create accurate and smooth curly cuts.Again, the main thing - to use suitable for a particular purpose or diamond wire saws.Of course, cutting out the procedure will take time, but it is one of the best examples that demonstrate how to cut stoneware tiles in the home with maximum precision.This method is especially useful if you want to create in the curved wall tile cuts for the further introduction of electrical appliances.
Creating holes in porcelain stoneware
Often operations are complemented by cutting and drilling.You can use special drills, circular saws, and if it is necessary to create a hole large diameter, then you will need a powerful malooborotistaya drill.Knowing some of the principles of how to cut the stoneware tiles at home, will help in this process, but there are some nuances.For example, drilling can be carried out only on the outside of porcelain tiles, as the back of the output of the working element will cause chipped.In some cases it is possible and applying Ballerina to create holes.This tool is good because it allows you to adjust the cutters manually, allowing you to fine-tune the parameters of the hole.
General recommendations for cutting
handling any material which is intended for decoration, aims to obtain high quality results without affecting the aesthetics.In the case of tiles is particularly important because it will be difficult to mask defects.Getting smooth sides and fine lines largely provided initially correctly labeled contours.For example, taking into account the principles of the technology of how to cut stoneware tiles grinder, we can conclude about the importance of cutting line.Artist takes the contours as the main direction in the process.In addition, important and security - protection from debris, dust, as well as protection from failure of the equipment are the primary measures in preparation for the work.Of course, not do without small ruses, including the use of wetting water stoneware, the use of suitable cutting elements, and uniform distribution of stress during the formation of the cut.
