Gazebo on the site today - it's not a luxury but a vital necessity.In this small room, spend a family holiday, take guests, arrange celebrations and so on. D. To erect such a facility in the garden or in the yard with their hands quite simple.In particular, in the event that for its construction will be used in the treatment of simple tech board.
kinds of wooden arbors
of timber can be collected only two types of structures.Very beautiful frame construction are obtained.Besides this the cheapest facilities - shield of timber pergola.His hands they are going very easy.Therefore, this option is by far the most popular among gardeners.You can also build a more thorough arbor railing which will be entirely assembled from a bar.Sometimes the way to build suburban areas and closed pavilions, which can use all year round.Very often in these facilities are established and barbecues.To make such equipment may be useful as a furnace made of brick or stone, or metal.
component of the project, of course, the construction of structures such as gazebos from a bar, the hands should begin by drawing up blueprints.It is best to draw two construction schemes - frontal and profile.Also worth a plan from above with the placement of all necessary garden furniture and necessary equipment.
The shape of the arbor may be rectangular or polyhedral.The first option in the construction is simple.On a slightly more sophisticated technology is built of many-sided gazebo bar.His hands drawings in this case is to specify how the mounting units and calculating the position of corner posts.Only in this case, you can build an accurate construction.
course, when drafting the need to perform, and all sorts of calculations concerning the amount of the required material and its final value.
How to choose a timber
Pavilions from a bar, the hands erected in the garden or in the yard, get a reliable, beautiful and durable only if the button was originally selected quality material.For the construction of these facilities usually take softwood.This could be, for example, fir, pine, cedar or spruce.The second option is the most preferred.Pine very good tolerate exposure to all sorts of adverse environmental factors.Moreover, this tree is different smoothness, durability and attractive shade.
build a beautiful gazebo can be both profiled and of laminated veneer lumber.Most of the owners of summer cottages are choosing the first option is cheaper.
construction of foundations
Since the gazebo of timber with his own hands (photos of these buildings can be seen on the page) is usually built small and light, too powerful for them to pour the foundation is not required.It is enough to be inexpensive pier foundation.It can be erected as a ceramic brick and wood or concrete.The last option is the most expensive and the most popular with the owners of suburban areas.Pour this foundation as follows:
- Perform layout, using a strong non-elastic cord, and wooden pegs long.
- drilled holes for poles with a diameter of about 30 cm and a depth of about 50.The distance between them should not exceed 1.5 m.
- Poured on the bottom of the pits a little gravel and tamped it.
- Install shuttering of the pipe rolled roofing material and four reinforcing rod connected clamp.
- underpour pillars.In the upper part of the outer svaek rods inserted under the gazebo stands.Above the surface, they have to perform at 20 cm.
After waiting a couple of weeks, foundation waterproofing on top of two layers of roofing felt and proceed to build the walls.
carcass and parapet
When constructing structures such as gazebos shield of timber with his own hands in the first place make the sill.In the corners of the material pushed onto the rods and fasten way "in a half-tree."In the middle lay a gazebo lag.Furthermore vertically installed corner posts.Attach them to pour into the foundation rods and an additional galvanized corners.Next, set the upper stud and nail handrail railing, leaving room for input.
Here in this way and is going to frame such facilities as a simple gazebo from a bar with your hands.If the building is not a shield, as usual, the lower crown is placed next, and connecting them by "in a half-tree" or "paw" to the height of the parapet.Next, spread in the same way only corners or set them on the counter.If the gazebo will be closed, put the timber up to the top.
Assembling roof
question of how to make the gazebo from a bar with your hands, nice and neat, is reduced to the correct assembly of the roof.Roofs on these plants usually do multifaceted.For a rectangular gazebo satisfied hipped.Going it is so:
- The top harness at angles diagonally set two beams.From the bar thickness of about 40-50 mm grind out an octagonal column height of the roof and attach it to their intersection.
- first set the angle of the foot.Planters slot can cut it out in themselves and in the stands.
- Mount four intermediate (auxiliary) rafters.To stand in the middle of all the legs attach long nails.
- Across rafters fixed crate of narrow boards.
- Mount sheets of metal or any other roofing material.
Sheathing parapet shield gazebo
trimmed railing frame structures can usually board or clapboard.The latter is best mounted on a hidden klyaymery upright.In this case, the grooves between the sections in the rain will not accumulate water.Sometimes parapet sheathe gazebos and metal sheets or plywood.You can simply install the balusters.In this case the railings mounted last.Sami balusters fixed to the beam across the floors strapping on metal studs length of about 8 cm. Handrail they can be bolted.
Decoration lath
Very impressive look trimmed thin strips of timber pergola.The hands (photos of the buildings you can see below), this spectacular decor hard to do.They are going to rack decorative frame on the ground.They then installed above the parapet.For their installation is necessary to prepare a sufficiently thick timber.From it shot down a rectangle the size of the aperture is fixed to the gazebo and the resulting frame rails at an angle of 45 or 90 grams.Then make another such box of timber and also obbivayut it.Then the two frames are connected to each other so that the slats were inside the resulting structure and placed crosswise.Then finished decorative elements are inserted into the openings.
final stage
After the construction of the gazebo bar with your hands is finished, start a covering floor.The open construction of the board is better positioned not too close, but at a small distance from each other (about 3-4 mm).The resulting gap in the rain water will drain.The ceiling of the gazebo is usually not sheathe.But you can decorate it edged boards.
The final stage of the construction will need to be sure to paint or varnish, designed for outdoor use.This greatly extends the life of the arbor.You can also use for the treatment of wooden elements of a special oil.It will not crack, paint, rags and leaves, as a varnish.
BBQ in the gazebo
When assembling the barbecue brick foundation under it is filled simultaneously with a base of the gazebo.It is desirable in the first place to build himself a brazier, and the walls have to build after it is ready.Collect brick barbecue, using poryadovkoy.
How to equip a gazebo and
course, erected necessarily need to decorate.Usually planted around the gazebo lianovidnye plants.It can be ivy, wild grapes or hops.On the beds can be planted as unpretentious marigold, petunia, ornamental cabbage and so on.. In most gazebo set table (usually the middle) and shops.You can also hang inside the drawers for storing garden tools, barbecue utensils, and so on. D.
As you can see, build a gazebo from a bar with your hands completely not difficult.To cope with this task can even the inexperienced young owner of the suburban area.Forces and means for the construction of gazebos usually leaves a little, and the use of it is obtained simply enormous.