If you head came the question of how to disassemble the tablet, but you barely familiar with modern technology and had never seen the inside of it, do not do it quite works on your device.Even if something is not working, or you become very interesting, but you almost does not make sense, it is wise to take the unit to experts.The fact that modern electronics has a very complex device, while it itself is quite fragile.That is why sometimes it happens that as a result of unprofessional and unsuccessful showdown even experts can not return to the life of the gadget.
disassemble the tablet: general instruction
worth noting that for such an operation, you need to arm themselves with special tools.In any electronics store or market their easy enough to find.Before you disassemble the tablet, you must prepare a set of thin screwdrivers, which includes direct and Phillips, as well as tweezers and a metal blade.In some cases, you may need even hex screwdriver, while the screws are not often found on the plates, it is to prepare, that there was no need to look for it when the machine is already at the stage of disassembly.
Milestones
It is clear that it is difficult in one article to describe in detail how to understand all tablet computers, but there are a few milestones.
Home
first phase of works with almost any tablet model requires you to detach itself from the back cover of the display panel.Depending on the manufacturer and brand of their compounds can be used special screws or fasteners.Most often, there are no screws, but before you disassemble the tablet Texet, will not only have to unscrew a few screws, but otschelknut special clips.And then you can walk around the perimeter of the display, hooking it through the metal blade.This must be done gently at intervals small size so as not to damage the screen, and also to gently detach it from the back cover.
next step
If we talk about how to disassemble the tablet, it should be continued.The second stage for most models involves disconnecting the loops, then you can remove the battery.All these manipulations you have done with the utmost care.If you do everything right, all fixtures and fittings must be disconnected easily as possible.Watch carefully to avoid accidentally left twisted screws, which are sometimes hidden, for example, under the gaskets or protective films.
When the battery will be disconnected, you can proceed to the subsequent dismantling.This step requires you to the following: remove the speakers, disconnect the camera, if possible, and unfasten from the system board device all the loops.Now you can unscrew the motherboard, which is usually mounted on the perimeter by means of special screws.
Parse Chinese-made tablet
It's not a secret that most of the tablets produced in China.It is clear that such products goes down often enough, and tablet computers is hardly the exception in this regard.There can be a lot of problems: broken screen, which must be replaced, refused to operate the touchscreen, the sound disappears and so on.And immediately the question arises of how to disassemble the tablet?Not all owners of such devices agree to carry them in repair, and decide to repair themselves.
Subtleties of
usually parsing of such devices is not particularly difficult.You must arm a small screwdriver, to find bolts and get to work.Typically, the tablet consists of a lid and of the tablet.After loosening the bolts removed cover.Typically, fasteners are held fairly well, so you should try to remove the cover.You can use a plastic card that you want to insert into the slot, and then hold it around the unit, which will separate the cover quite easily.
should exercise maximum accuracy, because the speaker can be attached to the cover, which is why you can tear off the wire.In addition to the speaker in front of you should seem to charge, and the battery, which is traditionally fixed on the screen.
Screen Replacement
If we talk about how to disassemble the tablet DNS or some other, you first need to disconnect the ribbon cable screen that is otvertochkoy it in gently hooked, then you need to find the bolts holding the board to loosentheir.The fee should be carefully disconnect, and then put aside.As a result, before you will only screen and battery.Now it's time to detach the screen, which you choose to replace.It should be carefully separated from the corners of his scotch, if available, or by an adhesive.Adhesive tape is removed and then put aside, it should be used again.It is intended for a more secure fit of the screen to prevent dust from getting under it.
Remove screen
This procedure will cause the screen that is easy separated from the plastic.Next, you need to separate it from the battery, which can be held on glue or double sided tape.Therefore, all work should be carried out very carefully so that no battery pack was damaged.You can make out the screen, and it is enough to pry it and remove the clips.
Now that you understand how to disassemble the tablet DNS, you can take a new screen to perform all the operations described above in reverse order.Set the screen on rubber seals, screwed and inserted board a train.After all the manipulations described worth checking your gadget works or not, which is connected and charging the unit is switched.If everything works, you can lock the battery pack on the double sided tape.We must now put a lid and tighten.
can give one important piece of advice.So you have not forgotten how the screen was located, trains, etc., it is still up to photograph the disassembly of the device, as well as during operation.It is necessary to make sure, especially if you do it the first time.It may be noted also that the Chinese tablet models, the screens can be very much, but do not despair in search of just such a model, because the approach can and some other.
Causes Problems
Analysts say that this year, tablets have to sell more than a laptop, but if with the second most users already know how to handle, without problems and successfully exploit the plates are able to not all.Because of what suffering and struggling tablet screen?Due to the fact that they are very thin and fragile, and also because of careless handling.Even the most accurate owners can become a victim of improper handling of the tablet from the children, the guests, animals and under different circumstances.To repair is not needed, it is important to keep the screen gazhdeta whole.
How to save the screen of the tablet?
that you do not raise questions about, for example, how to disassemble the tablet Asus, to replace the screen, you should follow a few rules.First of all it is important to careful handling.The tablet does not need to drop, leaving on the sofas or chairs, giving it inadequate people, be sure to instruct the children and so on.You must get cover, preferably having a hard surface that protects the screen.This allows you to keep the device in good condition and protect it from some of the causes of damage to the screen.Paste over the screen with a protective film.It usually is quite inexpensive, but it gives the glass a sufficiently large strength.The protective film is pasted onto a new device until the glass was not zyagryazneno.It is best to choose a film on your specific model of the tablet, as all Soup equipped with different screens.Usually, a good film is able to last for at least a year.
question of how to disassemble the tablet Prestigio Multipad or another producer, most often occurs when the screen is broken.Usually the screen consists of two layers of glass touch touchscreen and matrix.Typically, the matrix remains intact and broken touch touchscreen.Even in the broken state, he is able to work for some time, but do not delay the renovation, as in this case, significantly increases the likelihood of damage to the matrix.Moreover, the decoder can lock sensor, which is why it may not work even after the replacement.
Such plates as Prestigio Multipad, can replace touch screen without changing the matrix.But if the screen is cracked you from a fall or blow, or you have used the device for a long time with a cracked screen, it is likely that the time to suffer and die, but the hidden damage is often swim just in the process of replacing the glass or during further operation.In this case, you will be required to replace and touch screen, and the matrix.
If we talk about how to disassemble the tablet Prestigio, then there is a process similar to the previous description.You can consider options to work with devices from other manufacturers.
Tablets Acer
If we talk about how to disassemble the tablet Acer, here should pay attention to certain points.The device is equipped with a metal back cover and the plastic side panels.This is done to ensure that the antenna is not closed metal.Keep a special cover latch.Open is from the USB or HDMI.Then, reaching another angle, it is possible to pull the cover in the middle to open one edge completely.Similarly disengaged and the second edge.The upper part is simply pulled from the latch by pulling down the entire cover.Under the hood, which is usually the memory card is inserted, there is a sticker on the manufacturer's warranty.
Parse tablet Explay
Explay - it is quite a young Russian manufacturer who managed to win the love of lovers of different gadgets.But in this case, it is sometimes necessary to repair the device, and therefore, the question arises of how to disassemble the tablet Explay.Typically, particular difficulty in this.You will come in handy small screwdriver.The device should look for bolts, and then get to work.The cover is removed after this very simple.Shoot it should be carefully, because it is sometimes fix the speaker, and it is not necessary to tear.In addition to the speakers, you will see the fee as well as the battery, which is usually secured on the screen.Then you can do with dismantled tablet is what you were doing all this.
If we talk about how to disassemble the plate Oysters, then there is a sequence of actions has much in common with those that have already been described above.You can make only a few amendments to the model of the gadget.
In conclusion, it should be said that it is best to contact a qualified technician if you are experiencing a need for repair.
